FINAL/LEGAL DRAFT palmOne, Inc.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Table of Contents Charging your headset........................................................................ 2 Pairing with your Bluetooth phone ..................................................... 3 Turning your headset on and off......................................................... 5 Choosing wearing preference ............................................................ 6 Making a call...................................................................
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Thank you for purchasing the Treo™ Bluetooth® Headset by palmOne. We hope you will be delighted with its operation. Please read this manual to get started and make the best use of your headset's many features. [ ! ] IMPORTANT Using a mobile phone while driving creates a distraction to the driver, and this may increase the likelihood of an accident. When using the phone while driving, keep conversations short and do not make notes or read documents.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Your headset Your headset Multifunction button with blue indicator light Volume control buttons Charging connector Charging your headset Your headset uses a rechargeable battery that must be charged fully before you use the headset for the first time. Charge your headset for approximately 2 hours. Keep the following in mind while charging your headset: • Do not attempt to charge the headset with anything other than the AC charger provided.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Pairing with your Bluetooth phone NOTE Your headset comes with an AC charger and plugs that are compatible with international outlets. You can use the same charger for both your headset and your Treo™ 650 smartphone, so you do not need to carry two chargers when you travel. 0 1 2 Plug the AC charger into an electrical outlet, and then into the headset’s charging connector. Charge for 2 hours, and then remove the AC charger from the headset.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Pairing with your Bluetooth phone Pairing with your Treo 650 smartphone 0 1 Make sure the headset is turned off. 2 On the phone, go to Applications and select Bluetooth. 3 Make sure Bluetooth is on. 4 Select Setup Devices, and then select Hands-free Setup. 5 6 7 8 4 Press and hold the headset multifunction button until you see a solid blue light. for 8 seconds On the phone, select Next.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Turning your headset on and off Pairing with other Bluetooth phones 0 1 2 3 4 5 Make sure the headset is turned off. Press and hold the multifunction button for approximately 8 seconds, until you see a solid blue light. Release the button. Set your Bluetooth phone to discover the headset by following your phone’s instruction guide.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Choosing wearing preference When the headset is on, the indicator light flashes. When it is off, the light stops flashing and remains unlit. [ ! ] IMPORTANT Do not hold the button down for more than 3 to 5 seconds when turning the headset on or else it may go into pairing mode, and the blue indicator light will turn solid. If that happens, turn off the headset, wait 3 to 5 seconds, and then repeat the process for turning the headset on.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Choosing wearing preference 0 1 Hold the headset with the speaker facing you. 2 Flip the ear grip down. 3 Rotate the ear grip in a half-circle, counterclockwise. 4 Place the headset over your left ear with the grip toward the front.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Making a call 0 NOTE For optimal performance, wear your headset and your Bluetooth phone on the same side of your body. In general, you will get better performance when there are no obstructions (including parts of your body) between the headset and the phone. Making a call [ ! ] IMPORTANT Do not hold the multifunction button down too long when making, ending, or answering a call.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Answering a call NOTE Not all Bluetooth phones support voice-activated dialing through Bluetooth. Check with your phone manufacturer. You must set the voice tags on your phone to use voice-activated dialing. For better reception, record the voice tags from the headset. 3 4 Increase or decrease call volume by pressing the volume buttons . The tone volume increases or decreases to match the call volume.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Using call waiting 2 3 Increase or decrease call volume by pressing the volume buttons . The tone volume increases or decreases to match the call volume. To end a call, press and release the multifunction button the button to end a call on your phone’s keypad. , or press Using call waiting To use the call waiting feature, press the button on your phone to switch to the incoming call—typically the Send button.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Modes and alerts Modes and alerts Your headset works in several different modes, each with its own types of alerts.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Enhanced features Enhanced features Enhanced features are available for phones that support the hands-free Bluetooth profile, meaning you can use your headset wirelessly with your phone for some features. Check your phone’s instruction guide or contact the phone manufacturer if you are not sure if your phone supports the hands-free Bluetooth profile. NOTE The Treo 650 smartphone supports the hands-free profile.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Common questions Does my headset work with laptop or desktop computers, or handhelds? Your headset works with devices that are compliant with Bluetooth version 1.1 or higher specifications and support the headset and/or hands-free profile(s). Will anything cause interference with my conversation when I’m using my headset? Appliances such as cordless phones and wireless networking equipment may cause interference, adding a crackling noise.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Caring for your headset Caring for your headset • To clean the headset, use a clean, soft, slightly damp cloth. • Always store your headset with the power off and keep it well protected. • Avoid storage at high temperatures (above 60°C/134°F)—such as in a hot vehicle or in direct sunlight. (Storage at high temperatures can degrade performance and reduce battery life.) • Do not expose the headset or any of its supplied parts to rain or other liquids.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Glossary Passkey or PIN Secret code that needs to be entered on the phone in order to pair the mobile phone with the headset. When you pair your mobile phone with your headset, the devices recognize each other; the phone bypasses the discovery and authentication process and automatically accepts the transmission. Active mode Mode in which the headset has a call in progress.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Product regulatory information Product regulatory information FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Product regulatory information Responsible Party: palmOne, Inc. 400 N. McCarthy Blvd.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Product regulatory information Manufacturers Name: palmOne, Inc. Manufacturers Location: 400 North McCarthy Blvd.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential Copyright and Trademark Copyright and Trademark © 2004 palmOne, Inc. All rights reserved. palmOne and Treo are among the trademarks or registered trademarks owned by or licensed to palmOne, Inc. All other brand and product names are or may be trademarks of, and are used to identify products or services of, their respective owners. palmOne, Inc. uses the Bluetooth wireless technology trademark under express license from Bluetooth SIG, Inc.
FINAL/LEGAL DRAFT palmOne, Inc. Confidential palmOne, Inc. 400 N. McCarthy Blvd.
