User's Manual

Action Touch Answer/End for… Audible indications

Tap press briefly 1 beep

Press approximately 1 second 2 beeps

Press and hold approximately 5 seconds 2 beeps + a series of fading beeps

Double tap press briefly and repeat 1 beep + 2 short beeps

3 Headset setup, charging and use

IMPORTANT: Before you begin setup, be sure all parts have been above 32°F/0°C for at

least 30 minutes.

Setting up your headset to wear it how you like it

For optimal performance, the Jabra JX10 and your mobile phone should be worn on

the same side of your body so they can ‘see’ each other. In general, you will get better

performance when there are no obstructions between your headset and your mobile

phone or Bluetooth Hub.

The Jabra JX10 is ready to wear on your right ear. If you prefer to wear it on the left (this

would be optimal if you prefer to carry your mobile phone in a holder on your left hip),

gently remove the

earhook  and flip to fit left ear. (See Fig. 2.)

Fig. 2

Finally, bend the earhook

 so it fits comfortably on your ear. You can also wear your

Jabra JX10 Headset without the earhook.

English