User's Manual

•
Keep the desk phone handset off the hook.
•
Tap the headset Answer/End button. (The GN1000 will lift.)
The call will be transferred to the headset.
•
To end the call, tap the Answer/End button. (The GN1000 will be lowered.) Remember
to replace the desk phone handset after you have ended the call.
Staying within range
The sound in your headset will deteriorate if you move beyond range.* Move back into
range to restore sound quality.
If you move too far from the Bluetooth Hub, the call will be routed to your desk phone
handset. Return into range within 60 seconds and the call will be re-routed back to the
headset. If you stay out of range for more than 60 seconds, the GN1000 will lower the
handset and the call will be ended automatically.
Remember!
In general, you will get better performance when there are no obstructions between
your headset and your Bluetooth Hub.
* up to 33 feet/10 meters in line of sight
7 For use with a desk phone with electronic hookswitch (EHS)
IMPORTANT: In order to use your Jabra JX10 Headset with Bluetooth Hub with a desk
phone with EHS, you need to have an EHS-compliant Bluetooth Hub.
Jabra Bluetooth Hub setup
Connecting your Jabra Bluetooth Hub with desk phone and power supply
•
Connect your desk phone handset socket to the desk phone socket  on the
Bluetooth Hub using the supplied Y connection cord. To do this:
o connect the single end of the Y cord into the desk phone headset port
o connect the double end of the Y cord to the Bluetooth Hub
- the small plug connects to the Bluetooth Hub’s desk phone socket

- the large plug connects to the Bluetooth Hub’s AUX socket

19
English