User's Manual

NOTE: On some desk phones, you might hear an echo. This is because the headset and
handset audio links are both open. If this happens, replace the desk phone handset.
Staying within range
The sound in your headset will deteriorate if you move beyond range.* Move back into
range to restore sound quality.
If you move too far from the Bluetooth Hub, the call will be routed to your desk phone
handset. Return into range within 60 seconds and the call will be re-routed back to
the headset. If you stay out of range for more than 60 seconds, the call may remain
active (this is phone dependent, please check your desk phone User Manual for more
information).
Remember!
In general, you will get better performance when there are no obstructions between
your headset and your Bluetooth Hub.
* up to 33 feet/10 meters in line of sight
6 For use with desk phone with GN1000 (remote handset lifter)
The GN1000 lifts or lowers your handset automatically, allowing you to answer and end
calls when you’re away from your desk.Jabra Bluetooth Hub setup
Jabra Bluetooth Hub setup
Connecting your Jabra Bluetooth Hub with desk phone and power supply
•
Disconnect the handset from your desk phone (by unplugging the handset from the
socket on the desk phone).
•
Connect the handset to your Bluetooth Hub’s handset socket .
•
Connect the desk phone handset socket to the Bluetooth Hub desk phone socket 
using the supplied connection cord (desk phone-to-Bluetooth Hub
).
•
Connect the GN1000 to the AUX socket  on the Bluetooth Hub (see GN1000 User
Manual
).
•
Connect the power supply to your Bluetooth Hub’s power supply socket .
•
Connect the power supply to the wall power socket.
16
English