A335W USER MANUAL 東訊股份有限公司 Tecom Co; Ltd 新竹市科學園區研發二路 23 號 23, R&D Road 2, Science-Based Industrial Park Hsin-Chu Taiwan R.O.C.
1 Marketing Definition and Requirements This section shall contain consolidation of the process in product marketing. It is acceptable that spec can be a bit loose in this chapter but subsequent chapters leave no room for loose specs. 1.1 General Description The product is a Bluetooth-enabled USB audio device intended to be used as an accessory for standard industry PCs. It is designed to work with BT headsets as long as they adhere to the Bluetooth 2.
VoIP client / softphone support Other key functionality: Auto pairing Implementing the newly developed GN USB standard the device will be compliant to the Microsoft Unified Communications (UC) standard. A variety of VoIP clients and/or softphones using the current GN USB HID commands (8120, 9300 series) will also provide basic headset supported without additional customization. The product is fully compliant with GN’s PC software developments and SDKs (Hector).
Number of trusted devices in the trusted device list Normally 1 set USB device classes • • • Power-up behaviour Downloadable software First power up: goes into the pairing mode Next power up: try to reconnect to the last connected device for 1 min.
2.1 Model name Product Bluetooth PnP Audio USB Class1 Dongle – Leopard Product ID 261-251531R 2.2 Firmware Leopard FW release 0.08 2.3 Hardware 2.3.1 Block Diagram 2.3.
3.1 Physical Dimension and Component Placement With USB connector: 51 mm x 14.05 mm W/O USB connector: 35 mm x 14.
3.
Warning statements THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAYNOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THATMAY CAUSE UNDESIRED OPERATION. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
