User's Manual

10
11
Adjust volume
Adjust volume on both hearing instruments
The “+” and “-“ keys are used to ad-
just volume (5 and 6 on page 7). Vol-
ume may be adjusted on both hear-
ing instruments simultaneously or on
each side independently. By default,
both hearing instruments are “active”
which is indicated in the display by two
arrowheads (< and >) located next to the volume bars. Both hear-
ing instruments can simultaneously be made louder by pressing
the “+” key or softer by pressing the “-“ key. Each adjustment is
accompanied by beep tones in the hearing instruments as well as
a visual change in the volume bars shown in the display.
Adjust volume on the left hearing aid only
To adjust volume on the left side only,
first press the “<” key on the keypad
(7 on page 7). Doing so will make the
left hearing instrument “active” and
the right hearing instrument “inactive”.
This will be indicated by a left arrow-
head (<) in the display, with the right
arrowhead turned off. Now press “+” or “-“ to adjust volume on
the left hearing instrument only.
Getting Started
Changing program
The “P” button (9 on page 7) is used to change the programs that
your hearing care professional has programmed into your hearing
instruments. The name of the program displayed can be con-
figured by your hearing care professional. Each time you press
the “P” button the program advances one step, returning back to
program 1 at the end of each cycle (e.g. 1, 2, 3, 1). Each change
in program is accompanied by beep tones in both hearing instru-
ments and the program currently in use is shown in the display.
For optimal performance it is recommended that both aids be set
to the same program*.
* See the appendix for further details.
Program 1 ‘Basic’ Program 2 ‘Noise’