User Manual

20
21
3. Insert the hearing instrument into your ear canal. Opening and closing your
mouth may ease insertion.
4. Gently push the microphone into the creased area of the ear that is located
above the microphone entrance, and make sure the tubing is in place.
Control will continue to work as usual, but you will not be able to use your ReSound Unite TV
and Phone Clip. At some point the battery level will also be too low to support the remote con-
trol as well and you will once again hear the descending tones. The hearing instruments will
continue to work as usual. Once a new battery is inserted, full operation of the accessories will
resume.
Inserting/Removing hearing instruments
Insertion (remote microphone)
1. Hold the hearing instrument between your thumb and index finger,
either above and below or on the sides.
2. Place the sound outlet portion into your ear canal. Turn the top part
of the earmould gently backwards and forwards so that it tucks behind
the fold of skin above your ear canal.
Insertion (CIC, mini-canal, ITC, and ITE)
1. Hold the hearing instrument between your thumb and index finger, either
above and below or on the sides.
2. Place the sound outlet portion into your ear canal. Turn the top part of the
hearing instrument gently backwards and forwards so that it tucks behind
the fold of skin above your ear canal.
3. Insert the hearing instrument into your ear canal. Opening and closing your
mouth may ease insertion.