User's Guide
72 Regulatory information
During normal operation the temperature should not exceed the limit values of 0 °C (+32 °F) to +45° C
(+113 °F), and relative humidity of 90% RH, non-condensing. Air pressure between 500 hPa and
1100 hPa is appropriate.
During transport or storage, the temperature should not exceed the limit values of -20 °C (-4 °F) to
+60° C (+140 °F) and relative humidity of 90% RH, non-condensing (for limited time). The air pressure
between 500 hPa and 1100 hPa is appropriate.
Statement
This device complies with part 15 of the FCC rules and ISED rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules and ISED rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.