User's Guide

44 Cleaning and caring for your hearing aids
Tulip domes
To change a tulip dome, follow these instructions:
2. Push the largest petal back, then
press the tulip dome over the ribbed
end of the receiver wire.
3. Check that the tulip dome is
securely mounted by verifying
that the collar completely covers
the ribbed end of the wire.
4. Push the larger petal
forward.
This illustration show correctly
mounted tulip domes. Ensure
the large petal is outside the
small petal.
1. Remove the used dome by pulling
o󰀨 the receiver and discard.
This may require a bit of force.