User's Guide
43Cleaning and caring for your hearing aids
2. Push the new dome
over the ribbed end of
the receiver wire.
3. Check that the dome is securely mounted
by carefully lifting the lower part of the dome
and verifying that the collar completely
covers the ribbed end of the wire.
4. When placed correctly,
the dome will appear
slightly angled.
Standard domes
The illustrations show an open dome, but the procedure is the same for all other domes. Follow these
instructions to replace your domes.
1. Remove the used dome by pulling
it o the receiver and discard. This
may require a bit of force.