User Manual
14
15
1. The ReSound Unite Phone Clip is OFF. Place your mobile
phone next to the Phone Clip, and make sure your phone is
ON.
Press and hold the multifunctional button on the Phone Clip
for 7 seconds. The LED will now be solid blue for two minutes
indicating that Bluetooth pairing mode is active. The ReSound
Unite Phone Clip will be in Bluetooth pairing mode only in the
first two minutes after having been turned ON.
2. Find the connectivity settings of your phone. Look for the
“Bluetooth” feature in the main menu or one of the submenus,
such as “Connectivity”.
3. On your mobile phone, ensure that the Bluetooth is turned
ON.
4. On the mobile phone choose to search for Bluetooth devices.
5. Your mobile phone should present a list of Bluetooth devices
discovered. Select “Hearing Aid Phone” from this list.
6. Your mobile phone may then ask you to enter a passcode. If
so, enter “0000” (four zeros).
Your ReSound Unite Phone Clip should now be paired to your
mobile phone. Some mobile phones may ask which Bluetooth
service you wish to enable. enable, select “Headset”.
Connecting
Once your mobile phone and ReSound Unite Phone Clip are
paired, the mobile phone needs to be connected before it will
actually send the appropriate audio signals.
This function should also appear in your mobile phone’s “Blue-
tooth” menu, usually under a list of “Paired Devices”. In that list,
highlight your ReSound Unite Phone Clip and select “Connect”.
• WhenyourReSoundUnitePhoneClipandmobilephoneare
connected, you may see a headset symbol on the main screen
of your mobile phone, similar to this:
The connection between the ReSound Unite Phone Clip and the
mobile phone will be maintained for as long as both devices are
turned ON and remain within range of each other. If either device
is switched OFF or moves out of range, you may have to perform
the connection procedure again.
On some phone you can configure “Automatic Reconnection”.
We recommend that you do so if the feature is available. Refer to
the user guide of your mobile phone for instructions on how to do
this if supported.