User Manual

36
37
SYMPTOM
The Bluetooth pairing failed
The mobile phone is ringing
but the light indicator on the
Phone Clip does not flash,
and no ringing tones will
sound in the hearing aids
CAUSE
The Phone Clip left Bluetooth
pairing mode before mobile
phone completed the pairing
session
The user entered a wrong
4-digit PIN code
The Phone Clip is powered off
The Phone Clip and mobile
phone have not been paired
The Bluetooth connection
between the Phone Clip and
the mobile phone is lost
POSSIBLE REMEDY
Repeat the Bluetooth pairing process, and assure that the pro-
cess is completed within 120 seconds after having been acti-
vated in the Phone Clip
Repeat the Bluetooth pairing process and if a PIN code is re-
quested, enter 0000 (four zeros)
Power on the Phone Clip
Perform the Bluetooth pairing process and make a Bluetooth
connection between the Phone Clip and the mobile phone
Assure that Bluetooth is enabled in the mobile phone and make
a Bluetooth connection between the Phone Clip and the mobile
phone again, e.g. by pressing the multifunction button briefly on
the Phone Clip.
As for any details of the Bluetooth operation of the mobile phone,
please refer to its user guide
TROUBLESHOOTING GUIDE