User Instructions

NO.3
1. Bluetooth Mesh devices require a gateway to support schedule and third-party
control.
2. Currently, sockets, switches and lights have been supported for third party
control.
3. Generally, when the Bluetooth device is powered on, it will automatically enter
the state to be connected. If the device cannot be scan, it needs to be reset. The
reset mode of different devices will be different. The common reset modes are
listed as follows:
1) Light: Turn the light three times in 10 seconds; the light will flash slightly after
resetting
2) Socket: long press button for about 3 seconds, the indicator will flash after reset
3) Gateway: Press and hold the button for about 3 seconds until one of the lights is
on.
4) Low-power devices: long press the button for about 3 seconds
Others