Instructions for Bluetooth mesh light
NO.1 Add Device 1. Preparations: Connect the device to the power supply; IOS mobile phone needs to turn on Bluetooth, Android system needs to turn on Bluetooth and GPS at the same time; 2. open the Tuya smart APP, click "+" in the upper right corner or “Add Device" in the page; 3. click "Bluetooth ".
NO.1 Add Device 1. The system automatically starts scanning nearby equipment, as shown in Figure 1. 2. After discovering the device to be connected, click “Add” to start the connection, as shown in Figure 2.
NO.1 Add Device After successfully added, you can modify the device’s name and then click “Done”.
NO.2 Device Controls 1. After the device is successfully added, it will be displayed on the “My Home” page, as shown in Figure 1. 2. Enter the device control page to see all the functions. Click “dimmer”, you can adjust the brightness and saturation of the bulb, as shown in Figure 2. 3. Scene: Select the appropriate scene according to your needs, and the bulb will be replaced with the brightness and color suitable for the selected scene, as shown in Figure 3.
NO.2 Device Controls 4. Music: Click “select music” and then click on “use microphone” , so that you can receive nearby music and the light will change color with the rhythm of the music.
NO.2 Group Control 1. Click "..." in the upper right corner of the control page to enter the "More" page. 2. Click "Create Group", select the device you want to join the group, then click “Confirm”.
NO.3 Others 1. Bluetooth Mesh devices require a gateway to support schedule and third-party control. 2. Currently, sockets, switches and lights have been supported for third party control. 3. Generally, when the Bluetooth device is powered on, it will automatically enter the state to be connected. If the device cannot be scan, it needs to be reset. The reset mode of different devices will be different.
Thank You Note: 1) Figures in this manual apply to IOS screens only. Figures for Andriod will differ slightly. 2) Products and software are constantly being upgraded, and data and software menus used in this manual are for reference only. Please excuse us if we are unable to notify you of any changes.
