User's Manual
Table Of Contents
- 1. Product introduction---------------------------
- 1.1 Product model---------------------------------
- 1.2 Function description--------------------------
- 1.3 Product schematic diagram---------------------
- 2. Product specifications ------------------------
- Three, electrical protection requirements --------
- 3.1 Output short circuit protection ------------
- 3.2 Input overvoltage protection----------------
- 3.3 Battery protection -------------------------
- 3.4 Release protection -------------------------
- Four, working environment ------------------------
- Five, function instruction -----------------------
- 5.1 Charging with external power supply---------
- 5.2 Charging the built-in battery --------------
- 6 .product precautions----------------------------
- 4.1 Operating temperature:：0°C ~ 40°C (32°F ~ 104°
- 4.2 Storage temperature: -25°C - 45°C (-13°F - 113
S/N
NP-20160330
-001
Revision
1.0
Product Design Requirements
Page
5 OF 6
charged.) At the same time, you can put the APPLE WATCH above the product module, and the
watch will be charged while the battery is charged by the external power supply.
5.2 Charging the built-in battery
When you need to use the built-in battery to charge the APPLE WATCH, you only need to
click the power-on button. At this time, the battery indicator will flash and display according to
the current battery level (25%, 50%, 75%, 100%). 4 gears, one light represents one gear), at this
time, you only need to put the APPLE WATCH above the charging module, and the charging will
proceed automatically. (The battery in the saturated state can provide more than 1.5 times of
charging for the APPLE WATCH 1st generation).
6 . Product considerations
6.1 Please do not let any of the objects (such as fuel, needle) or any liquid (water, beverage) fell
and infiltrate into product, leading the product can't not normal use.
6.2 Do not place and use the product in
1) Moisture.2) Dusty places. 3) rusty objects.
6.3 Please keep the product in plastic bag when it’s a long time not use it. Prevent dust and
oxidation resulted socket in poor contact.
● Do not repair the product and replace parts yourself, please return the faulty back to your
supplier (Unless there are special instructions in this manual approach)
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This