User's Manual
Table Of Contents
- 1. Product introduction---------------------------
- 1.1 Product model---------------------------------
- 1.2 Function description--------------------------
- 1.3 Product schematic diagram---------------------
- 2. Product specifications ------------------------
- Three, electrical protection requirements --------
- 3.1 Output short circuit protection ------------
- 3.2 Input overvoltage protection----------------
- 3.3 Battery protection -------------------------
- 3.4 Release protection -------------------------
- Four, working environment ------------------------
- Five, function instruction -----------------------
- 5.1 Charging with external power supply---------
- 5.2 Charging the built-in battery --------------
- 6 .product precautions----------------------------
- 4.1 Operating temperature:：0°C ~ 40°C (32°F ~ 104°
- 4.2 Storage temperature: -25°C - 45°C (-13°F - 113
S/N
NP-20160330
-001
Revision
1.0
Product Design Requirements
Page
3 OF 6
1. Product introduction:
1.1. Product model: P07A
1.2. Function description: P07A mobile wireless charger, the product has a built-in 890mAH
polymer battery for charging Apple Watch. The product has a MicroUSB interface, which can be
connected to an ordinary charger to charge the Apple Watch and charge the battery at the
same time.
. The product has 4 power indicator lights, which can indicate the current power and charging
status. It is the best travel partner of APPLE WATCH.
1.3 Product schematic diagram:
Interface and component function description:
SN
Interface
Description
Remark
01
Buckle
Easy to carry
02
Original Apple Watch
Wireless charging module
Original Apple Watch wireless charging module
03
Switch button
Control the working status of the product, click to
turn on, long press to turn off
04
Battery indicator LED
Indicate the battery power and charging status,
divided into 25%, 50%, 75%, 100% 4 levels, when
charging, according to the level of charge to the
flashing prompt.
Remarks