User Manual

Pocket NFC Reader / Writer User Manual
© 2019 by GMMC GmbH Page 4 of 4
Electrical and physical parameters
Power supply
USB bus powered 5.00 [V] (+0.25−0.60 V)
Host Interface
 USB A connector
Card polling
After power up RF field is turned. A Tag discovery loop is started until
communication between reader and tag is established.
Optical interface
3 LEDS red, green, blue for status indication
Operating temperature
-10°C – +65°C
Approvals
FCC ID: 2AKHW-POCKETNFC
IC: 22202-POCKETNFC
CE
label location: at bottom of device
Supply Current
< 80 mA (60 mA typ.)
Physical Dimensions
L x W x H
64 x 25 x 8.5 [mm]
Note: MIFARE, MIFARE Classic, MIFARE DESFire, MIFARE Plus and NTAG are registered
trademarks of NXP B.V.