Product Manual

XRS-370C
34
Activating the Quiet mode
1. Select a channel that has been stored in the Quiet memory.
Q will be
displayed.
NOTE: You cannot activate the Quiet mode unless you have selected
a stored channel.
2. Press the MENU key, and navigate to select
FUNCTIONS > TOGGLE QMode.
3. Press the MENU key to select from the ON or OFF options.
When Quiet mode is switched ON,
will appear at the top of the display
indicating that Quiet operation is enabled. Now, all channels stored in the Quiet
memory will operating in the Quiet mode.
When Quiet mode is switched OFF,
will disappear from the display indicating
that Quiet operation is disabled. Now, all channels stored in the Quiet memory will
be open for signals.
Receiving signals in the Quiet mode
• If a normal signal is received on a Quiet channel, the channel will appear
busy (the
icon will be visible) but no sound will be heard from the
speaker.
• If a normal signal is received on an Open channel (one that is not in the
Quiet memory) the signal will be heard in the usual way.
• If your SelCall Ident is received on any channel - Open or QUIET - the
Quiet mode will be cancelled and the alarm will beep to alert you to
the call. In addition, the caller’s name and number will be displayed. All
channels will now be open for normal transmission and reception.
Scanning in the Quiet mode
The radio will allow you to scan while the QUIET mode is active. Using this feature
you can monitor a group of Quiet channels or a combination of Quiet and Open
channels.
NOTE: To ensure reliable SelCall detection when scanning in the Quiet mode, it is
recommended that you restrict the number of channels in the Scan Group.