Product Manual

XRS-370C
16
BEEP TONE VOLUME
The Beep tone provides audible feedback whenever the keys are pressed. The
Beep tone volume can be adjusted in values from 0 – 10.
To switch the beep o, select 0.
To adjust volume of beep tone:
1. Press the MENU key.
2. Navigate through the menu to select
RADIO SETTINGS > BEEP VOLUME.
You can use the
or
key to increase or decrease the beep tone.
DYNAMIC VOLUME CONTROL (DVC)
The modulation level of signals heard on the UHF CB band has always varied
considerably resulting in noticeable dierences in received audio volume between
stations.
Generally, users have compensated for this by adjusting the Volume control for
each incoming signal.
With the introduction of 80 channel narrow band transmissions that use lower
levels of modulation, the dierences in received audio volume is likely to increase
further.
Your XRS Connect radio is able to automatically compensate for these variations
by utilising a Dynamic Volume Control. When activated through the menu, this
feature automatically compensates for variations in received audio level resulting
in a constant audio output level to the speaker.
To activate/deactivate Dynamic Volume Control:
1. Press the MENU key.
2. Navigate through the menu to select
RADIO SETTINGS > DYNAMIC VOL.
You can use the MENU key to turn this function on or o.