SPK008 6x9 4 WAY Wake Tower SPEAKER SYSTEM Instruction leaflet
Installation instructions The wake tower speaker is designed to hang from a wake tower of diameter ranging from 40–50 mm (1.5”–2”). Attaching the speaker to the Wake tower 1. R emove both nuts holding the top plate onto the bracket using a 4.75 mm (0.2”) allen key. Speaker Cable wiring 1. T ake the two (2) supplied rubber grommets and snip off the end so a hole the diameter of your speaker cable is made. GME recommends the use of 6–10 mm (0.2” –0.
Speaker driver specifications SPK008 System - mm (inches) Power Watts Tweeter - mm (inches) Midrange - mm (inches) Efficiency (1M/1W) db Frequency Response Impedance (Ohms) Weight - kgs (lbs) 152 x 229 (6” x 9”) 210 13 (½”) Neo PEI dome x 2 51 (2”) mylar cone 91 60 Hz–22 kHz 4 4.15 (9.1) WARRANTY GME limit this warranty to the original purchaser of the equipment.
Part Number: 310437 Drawing Number: 44317-2 S PK008
