Owner manual

GX600D INSTRUCTIONMANUAL PAGE15
To EDIT a contact stored in the Address Book:
1. Select‘EDIT’fromtheAddressBookmenuandpressthe
CALLbutton.Alistofstorednamesisdisplayed.
2. Pressthe or keystoscrolltothedesirednamethen
press the CALLbuttontoselectit.TheNameandMMSI
oftheselecteditemisdisplayedwiththeashingcursor
positionedontherstcharacter.
3. ToedittheName,brieypresstheCALLbutton
repeatedlytomovethecursortothecharacterthat
requiresediting.Thecharacterwillash.
4. Pressthe or keystochangethecharacterin
thatposition.
5. Todeleteacharacterimmediatelytotheleftofthe
cursorposition,pressthe–key.
6. ToedittheMMSInumber,pressandholdtheCALL
button.ThecursorwillmovetotheMMSInumber.
7. RepeattheprocessabovetoedittheMMSInumber
asrequired.
8. Whennished,pressandholdtheCALLbuttontosave
theentryandreturntotheAddressBookmenu.
ERASING CONTACTS
To ERASE a single contact from the Address Book:
1. Select‘ERASE’fromtheAddressBookmenuandpress
the CALLbutton.
2. Select‘One-By-One’andpresstheCALLbutton.
3. Usethe or keystoselecttherequirednamethen
press the CALLbutton.‘EraseEntry?’isdisplayedalong
withthenameandMMSIofthecontact.
4. PresstheCALLbuttontoconrmdeletionorpressthe–
keytocancel.
To ERASE ALL contacts from the Address Book:
1. Select‘ERASE’fromtheAddressBookmenuandpress
the CALLbutton.
2. Select‘AllEntries’andpresstheCALLbutton.
3. ‘EraseAllAddBook?’isdisplayed.PresstheCALL
buttontoconrmorpressthe–keytocancel.
CALL LOGS
ThecalllogkeepstrackoftheDSCcallsyouhavereceived.
DSCcallsareloggedaseitherRoutineorDistress.Upto
10callscanbeloggedineachcategory.Loggedcallsare
numbered1–10withcall1beingthemostrecent.Ifmore
than10callshavebeenloggedtheoldestcallisdiscarded
whenanewcallislogged.
Viewing the Call Logs:
1. Select‘CALLLOG’fromthemainmenuandpressthe
CALLbutton.
2. Selecteither‘ROUTINE’or‘DISTRESS’fromtheCallLog
menuandpresstheCALLbutton.
3. Themostrecentlyloggedcallwillbedisplayedas
‘RECEIVED:1’alongwiththeMMSIofthecaller
anddetailsofthecall.Ifthecallerisinyouraddress
book,theirnamewillbedisplayedinplaceofthe
MMSInumber.
4. Pressthe or keystoviewadditionalloggedcalls.
To call a station listed in the Call Log:
1. Whentherequiredloggedcallisdisplayed,brieypress
the CALLbutton.
2. Usethe or keystoselecttherequiredchannelif
prompted.
3. PresstheCALLbutton.‘SendCall?’Isdisplayed.
4. PresstheCALLbuttonagaintosendthecall.
NOTE: Youcanalsocallstationsfromthecalllogusingthe
‘Call’optioninthesubmenu(describedbelow).
CALL LOG SUBMENU
Whiledisplayingthedetailsofaloggedcall,brieypress
the Volumeknobtoaccessadditionalsubmenuoptions
relatingtothedisplayedcall.Thefollowingsubmenu
optionsareavailable
• Call
• AddADDR
• Erase
To Call a station listed in the Call Log (alternate
method):
1. Whentherequiredloggedcallisdisplayed,pressthe
Volumeknobtoaccessthesubmenu.
2. Select‘Call’thenpresstheCALLbutton.
3. Usethe or keystoselecttherequiredchannelif
prompted.
4. PresstheCALLbutton.‘SendCall?’Isdisplayed
5. PresstheCALLbuttonagaintosendthecall.
To Add the listed caller to your Address Book:
1. Select‘ADDADDR’fromtheAddressbookmenuand
press the CALLbutton.Youwillbepromptedtoentera
nameforthisentry.