Owner manual

IfachartplotterisconnectedtoyourGX600D,theposition
ofthecallingshipisdisplayedonthechartplotter.
Pressanykeytoclearthedisplay.Theradioreturnsto
Normalmodeonthecurrentchannel.
CONFIGURATION MENU
TheGX600Diseasilyconguredusingamenusystem.The
menuallowsaccesstothefollowingoptions:
• Address Book:Add,EditandErasefrequentlycalled
stationsinyouraddressbook
• Call Log:Keeptrackofincomingcallsandreturncalls
recordedinthelog.Callsarecategorisedseparatelyas
RoutineorDistressforeasyidentication.
• Display:Changeyourdisplay’sbrightnessandcontrast.
• Setup:Adjustkeybeepsandalarmvolumesettings,
selectthechannelband,addnamestochannels,
congureDSCresponseparametersandselectNMEA
baudrates.
• GPS Setup:EnterLat/Long,UTCtimeandtimeoffset
andcongureGPSdisplayandalertstatus.
• MMSI:EnteryourUserandGroupMMSIcodes.
USING THE MENU
NOTE: ThefollowingdescriptionappliestotheMC516
microphonesuppliedwithyourGX600D.Ifusingthe
optionalMC540keypadmicrophonepleaseusethe
alternativekeysasshowninthetablebelow.
For all menu items,rstpresstheVolumeknobto
accessthemainmenu.Onceyouareinthemainmenu,
mostfunctionscanbeaccessedfromthemicrophone.
• Usethe or keysonthemicrophone(orradio)to
scrollthroughthevariousmenuoptions.Selectedmenu
itemsareprexedwith‘>’.
• PresstheCALLbuttononthemicrophone(orthe
Volumeknobontheradio)toacceptyourselection.
• Pressthe–keyonthemicrophonetoquitthe
currentselectionorpressrepeatedlytoexitthemenu
completely.
• Whenenteringcharactersusethe or keystoselect
the character then press the CALLbuttontomovetothe
nextcharacterposition.
MENU OPTIONS
ADDRESS BOOK
Theaddressbookisusedtostorethenamesanduser
MMSI’sofothervessels.Thismakesiteasytoidentify
incomingDSCcallsandtomakeDSCcallstothosestations.
To select the Address Book:
1. Fromthemainmenu,pressthe or keystoselect
‘ADDBOOK’
2. PresstheCALLbuttontoaccept.
ThefollowingAddressBookoptionsareavailable
• ADD
• EDIT
• ERASE
To ADD a contact to the Address Book:
1. Select‘ADD’fromtheAddressBookmenuandpressthe
CALLbutton.‘Name’isdisplayed.
2. Usethe or keystoselecttherstcharacterofyour
contact’sname.PresstheCALLbuttontomovetothe
nextcharacterposition.
3. Repeatstep2untilallrequiredcharactershavebeen
entered.Upto11charactersareavailable.
4. Whennished,pressandholdtheCALLbuttonto
conrm.‘MMSI’isthendisplayed.
5. Usethe or keystoentertherstdigitofyour
contact’sMMSInumber.PresstheCALLbuttontomove
tothenextdigitposition.
6. Repeatstep5untilalldigitshavebeenentered.
7. PressandholdtheCALLbuttontoconrmandstorethe
contactintotheaddressbook.
NOTE: TocorrectanerrorwhileenteringanameorMMSI:
1. BrieypresstheCALLbuttonrepeatedlytomovethe
cursortothecharacteryouwishtoedit.Thecharacterat
thecursorpositionwillash.
2. Tochangethecharacteratthecursorposition,pressthe
or keys.
3. Todeleteacharactertotheleftofthecursorposition,
press the –key.
PAGE14 INSTRUCTIONMANUAL GX600D
FUNCTION MC516 MC540
Select/Enter Call/Volume Menu/Enter
Clear/Quit – Clear
Up
Down
EnterCharacters
or
Alpha/numeric
keypad