INNOVATIVE ELECTRONICS AE2000 Omni directional FM/TV Antenna I N s t r u c t i o n m a n u a l
INTRODUCTION The AE2000 has a built in amplifier which combines the latest field effect and bipolar transistor technology. This gives minimum noise (snow) on weak signals and also avoids patterning interference etc., due to overload caused by strong signals from nearby transmitters. The GME AE2000 three element broadband clover leaf TV/FM antenna has been designed specifically for marine and mobile land use.
PARTS LIST Locate and familiarise yourself with all parts making up the AE2000 system listed below 1 x Instruction leaflet. 1 x 25 mm (1”) dia. x 450 mm (18”) long aluminium support tube. 1 x Antenna dome assembly. 2 x Slope adjusting wedge spacers. 1 x 10 metre length white coaxial downlead with fitted waterproof ‘F’ connector. 1 x Cable tie. 1 x Coaxial connector, screw on solderless ‘F’ type. 3 x M5 x 40 mm stainless steel Philips head bolts. 1 x DC power injector assembly.
ASSEMBLY & CONNECTION When the antenna’s location has been decided and mechanical arrangements to support it have been made, final assembly and connection of the downlead can be commenced. 1 Select one of the moulded bases and use the 3 M5 X 40 mm stainless bolts to attach it to the underside of the dome. Note that the nuts are captive within the dome assembly. in diagram 1 and 2. Take care to avoid any whiskers of wire from the cable shielding braid which could short circuit the connections.
14 If required, the AE2000 TV antenna system may be powered from the 240V mains supply by using GME Kingray plug pack and injector model PSK06F obtainable from your GME dealer.
Diagram 2 1 Cut back outer plastic cover. 2 F old braid back over outer cover. 3 R emove plastic from inner wire. 4 C lamp wire and braid in position 7 mm Copper braid Diagram 3 1 C ut back plastic cover. 2 F old braid back and remove plastic from inner wire. 3 Insert prepared cable into connectors body and screw in as far as possible. 6 mm 16 mm Trim off excess braid.
Standard communications contract warranty 2.3 We warrant our other repairs to be free from defects in materials and workmanship for three months from the date of the original repair. During this period and as our sole liability to you for the repair, we agree to repair or replace (at our option) repaired goods which we are satisfied are defective. 2.
Part Number: 310164 Drawing Number: 41151-3
