Operating Manual
76
Dispensing liquid
Condition
See
„Dispensing liquid“ → 71
After pressing the STEP button, the
number of STEPs to be dispensed (
After pressing the STEP button, the
)
decreases.
Handling residual volumes
For information on handling residual volumes, see
„Switching to emtying“
→ 71
and
„Aspirating liquid“ → 70
.
Presetting the STEP count
See Options > ‘Preset Step Count’.
Options
a. In the operating mode, tap on the symbol
.
The Options menu appears.
Option Meaning
Favorites Add active settings to Favorites. You can open these
again from the main menu under Favorites.
‘Preset Step Count’ Preset the STEP count.
‘Go To Auto-Disp’ Switch to Auto-Disp mode. The volume set in Mul-
ti-Disp mode is also set in Auto-Disp mode.
‘Help Work Mode’ Shows the help text for the mode.
Auto-Dispensing (AUTO-DISP)
For information on the function of this mode, see
„Overview of modes“
→ 65.
For information on setting the volume, speed, and other operating
steps found in all modes, see
„Operation“ → 67.
Automatically dispensing liquid
Condition
You have set the pause time (an interval between liquid dispensing steps)
manually or automatically.
a. Press and hold the STEP button.
Liquid is dispensed automatically, as long as the STEP button is held
down or as long as enough liquid is present in the tip.
While liquid is being dispensed, the pause time counts down on the
touchscreen display.
b. On the touchscreen display, you see the remaining STEPs.