Operating Manual

Switching off the device

NOTICE

Device behavior in unusual operating conditions

In unusual operating conditions (The system is no longer responding. The

battery is damaged.), the device restarts itself.

 A message then appears stating that the device cannot start until the

tip has been ejected.

 Hold the device over a appropriate vessel. The tip is emptied automa-

tically and ejected when you acknowledge the message. After this, the

device starts normally.

a. Empty and eject the tip, see

„Switching to emtying“

→ 71

and

„Ejecting the tip“ → 72

b. Press the power button.



A message appears asking if you would like to switch off the device.

Confirm by tapping

A message appears asking if you would like to switch off the device.

. Cancel by tapping X.



If the power button is pressed for approx. 1 s, the device goes into

standby. Longer than 1 s: the device switches off.

c. Hang the device upright in the holders provided. If the device is placed

in the charging stand, charging begins. In doing so, the LED of the

charging stand lights up.

Opening an operating mode

Select an operating mode from the main menu. The actual task (e.g. dis-

pensing) is carried out in the operating mode.

a. Swipe to select the

operating mode

b. Open the operating

mode by tapping

once

 The operating

mode appears:

Exiting an operating mode

a. In the operating mode, tap the

button.



The main menu appears.

If there is any liquid left in the tip, you will be asked if you would like

to drain the tip or continue working in another operating mode with the

remaining volume.