Operating Manual

66
Modes HandyStep
®
touch HandyStep
®
touch S
Auto-Dispensing (AUTO-DISP) + +
Pipetting (PIP) + +
Sequential Dispensing (SEQ-DISP) – +
Multi-Aspiration (MULTI-ASP) – +
Titration – +
Favorites + +
Modes in main menu Description
Settings
In Settings mode the device settings can be changed, e.g. time, display bright-
ness.
See
„Settings” → 73.
Multi-Dispensing
In Multi-Dispensing mode, an aspirated volume is gradually dispensed again.
Example application: dividing an aspirated volume into STEPs.
See
„Multi-Dispensing (MULTI-DISP)” → 75.
Auto-dispensing
In Auto-Dispensing mode, a volume is aspirated and gradually automatically dis-
pensed over a previously set time interval.
Example application: automatically dividing an aspirated volume into numerous
STEPs.
See
„Auto-Dispensing (AUTO-DISP)” → 76.
Pipetting
In Pipetting mode, a previously selected volume is aspirated once and dispensed
again.
See
„Pipetting (PIP)” → 79.
Sequential Dispensing
In Sequential Dispensing mode, an aspirated volume is dispensed over several,
preset STEPs of varying volume.
Example application: dilution series.
See
„Sequential Dispensing (SEQ-DISP)” → 80.
Multi-Aspiration
In Multi-Aspiration mode, several STEPs are collected in a tip and aspirated and
dispensed as a total volume.
Example application: removing residual volumes.
See
„Multi-Aspiration (MULTI-ASP)” → 82.