Instructions / Assembly

6
3
Installing the bulbs
A
Installation (continued)
4
Installing the glass shade
B
A
FF
□ Install a 60W MAX B10 bulb (not included) in each
socket of the xture body (A).
WARNING: Install as an uplight only.
Using a silicone rubber sealant rated for exterior use (not
included), caulk the upper two-thirds of the universal
crossbar (EE) on the xture body (A) to prevent water from
seeping into the xture and wiring connections.
□
□
Take out the decorative screws (FF), put the glass shade
(B) in, and attach the glass shade (B) with the decorative
screws (FF).
Lift the xture body (A) and the glass shade (B) up to
closely match the upper cover. Adjust the direction of
the xture body (A) .