Instructions / Assembly

6
Installation (continued)
□
4
Installing the glass
Put the glass (B) into the cooling cup of the fixture body
(A) and turn the glass to the right until it is tightened.
3
□
Making the electrical connections
and attaching the canopy
NOTE: Always use wire nuts (AA) to connect wires, and
push all excess wires and connections back into the outlet
box (not included).
□
□
□
Push all slack fixture wire through the canopy loop (KK)
and into the outlet box. Trim the excess fixture wire,
leaving a minimum of 6 in. hanging out of the outlet box.
Connect the ground wire from the branch circuit to the
ground screw (CC) on the crossbar (DD).
Connect the pendant cable as follows:
Attach the canopy (FF) to the outlet box, and secure it
with the loop ring (LL).
AA
DD
CC
FF
KK
LL
Cooling cup
A
B
GROUND WIRE
GROUND WIRE
BLACK WIRE
WHITE WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSEFROM FIXTURE
FROM FIXTURE
FROM FIXTURE
WIRE MARKED
WITHOUT WORDS
WIRE MARKED
WITH WORDS