User Guide

6
3
□ Pass the wires of the
glass shade (A) through the
center rod (B), and then install the center rod (B)
to the glass shade (A).
□ Install the canopy (C) to the center rod (B).
5
NOTE: Always use the wire nuts (AA) to connect wires and
push all excess wires and connections back into the junction
□ Fasten the hanging buckle of the canopy (C) to the
universal crossbar (EE).
Installing the center rod and the
canopy
Making the electrical connections
box (not included).
Connect the xture wire as follows:
EE
B
A
C
BB
Installation (continued)
WHITE WIRE WHITE WIRE
FROM FIXTURE
FROM FIXTURE
FROM FIXTURE
GROUND WIRE
BLACK WIRE BLACK WIRE
GROUND WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
4
□ Install the universal crossbar (EE) to the junction box
(not included) with the supplied junction box screws (BB).
Installing the universal crossbar
WARNING: Turn off power at the main fuse box.
CC
EE
AA
□ Connect the black wire of the power supply to the black
wire of the xture and connect the white wire of the
power supply to the white wire of the xture.
□ Wrap the ground wire from the xture around the ground
screw (CC) on the universal crossbar (EE), and then
connect the ground wire (two) from the xture to the
ground wire from the junction box.