Covers software version: 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 E-mail: service@glp.de Web: http://www.glp.
www.glp.
German Light Products® Table of contents 1 Description of Device.............................................................................................. 4 1.1 Safety Instructions ............................................................................................ 5 2 Preparation and Installation ................................................................................... 6 2.1 Safety information ........................................................................................
www.glp.de 1 Description of Device 1 1. Moving head (actively and passively cooled) 2. Arm with various cooling vents 2 3. LCD-Display/Menu (data entry) 3 4. Base with various connectors and Camlock mounting system 4 5. Power On/Off 6. DMX- Output (5 pin) 7. DMX- Input (5 pin) 8. Micro-fuse 5x20mm, T5A 9. Mains supply (Powercon) 10.
German Light Products® 1.1 Safety Instructions The IMPRESSION X4 is a High-Tech Product. To guarantee a smooth operation, it is necessary to respect the following rules. The manufacturer of this device will not take responsibility for damages through any disregard of the information provided in this manual. Warranty claims also will be voided in the case that the fixture housing is opened. 1. Before powering on the fixture, make sure that the fixtures fans and air inlets are clean and not blocked. 2.
www.glp.de 2 Preparation and Installation 2.1 Safety information The IMPRESSION X4 fixtures from GLP is fitted with a number of plano-convex lenses in a highly efficient collimator cluster. This type of lens can act as a strong magnifying glass. If the rays from a strong light source (such as the sun or another lighting fixture) are directed towards the front of any of these fixtures, then internal damage may occur.
German Light Products® 2.2 Mounting The IMPRESSION X4 is fully operational whether it hangs or is mounted to the wall. It can also be operated while standing on the floor. Keep a safety distance of min. 0.5 m towards any easily inflammable materials (decoration etc.). Pay attention to the regulations of: BGV C1 (former VBG 70) and DIN VDE 0711-217. The installation shall be done by qualified staff only.
www.glp.de 2.2.1 Mounting on the Floor (Upright) To operate the IMPRESSION X4 in an upright position, please use the dedicated tri-legged floor stand supplied with your fixture. It is fixed to the base of the fixture with fasteners called Camlock quick-release connectors. Insert the two fasteners and turn each 90° to lock them. Do the opposite to release them again. On both sides you'll find eyelets to pull though a fixing strap. This allows for additional bracing of the fixture. 2x Camlock 2x Eyelets 2.
German Light Products® 2.2.3 Mounting in sideways Position To operate the IMPRESSION X4 in a sideways position please use an additional mounting bar. This is fixed by two Camlock quick-release connectors. Two half-couplers (clamps) are used to mount the bar to a standard truss bar. This technique is necessary to cope with the torque which accrues in this mounting position. In addition it allows a repositioning of the couplers to fit between two truss chords.
www.glp.de 2.4 Connections 2.4.1 Power Supply ~100-240 Volt AC, 50-60 Hz, earth contact type plug - Powercon Connected load 350 VA (W) <=> T5A (micro-fuse 5x20mm) Please see printing on the case for the right electronic supply! Disconnect from the mains supply for changing the fuse and use only the above described micro-fuse type. 2.4.2 DMX USITT DMX-512 Standard input/output in 5 pin connectors. Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+] / Pin 4&5 N.C.
German Light Products® Pan/Tilt Movements Manual control for Pan/Tilt movements Special White Temperature Manual control for Color temperature Dimmer Manual control for Dimmer Shutter Manual control for Shutter White Manual control for White Blue Manual control for blue Green Manual control for green Red Manual control for red Color Wheel Manual control for the color wheel Tilt Manual control for Tilt (Y-movement) Key code xxxx Display Contrast PWM Frequ. Adj.
DOWN - UP www.glp.
German Light Products® 4 DMX Channel Selection (DMX Protocol) Normal-Mode 20 DMX channels Channel Function Time and Value 1) PAN-coarse 2) PAN-fine 3) Tilt-coarse 4) Tilt-fine 5) Color (fixed) 0 .. 623° 3,2s 0 ..
www.glp.
German Light Products® Channel (fixed) Function Color 01 - Red 1) Color 02 - Amber 1) Color 03 - Warm Yellow 1) Color 04 - Yellow 1) Color 05 - Green 1) Color 06 - Turquoise 1) Color 07 - Cyan 1) Color 08 - Blue 1) Color 09 - Lavender 1) Color 10 - Mauve 1) Color 11 - Magenta 1) Color 12 - Pink 1) White - CTO White White - CTB 6) Red 7) Green 8) Blue 9) White 10) Shutter 11) Dimmer 12) Zoom 13) Special 14) Pattern Rainbow Effect Stop 2) Rainbow Effect 3) Rainbow Effect, random colors Color mixing syste
www.glp.de High Resolution (Extended) -Mode 21 DMX Channels Channel Function Time and Value DMX % 1) PAN-coarse 2) PAN-fine 3) Tilt-coarse 4) Tilt-fine 5) Red- coarse 6) Red- fine 7) Green-coarse 8) Green-fine 9) Blue-coarse 10) Blue-fine 11) White-coarse 12) White-fine 13) Shutter 0 .. 623° 3,2s 0 ..
German Light Products® different from the ones marked with 1) in the tables above the rainbow start-color will be red. Rainbow-effect Stop will pause this function. After resuming the rainbow-effect will be continued from the current color. 2) 3) 1) The Rainbow-effect will run synchronously only if started from one of the predefined colors (see also before). Locking and unlocking the Control Panel Please lock and unlock the control panel by pressing the menu keys MODE & ENTER & UP at the same time.
www.glp.de 5 Maintaining and Cleaning the IMPRESSION X4 The IMPRESSION X4 is a fixture of very low maintenance. It is only necessary to clean the air inlets and outlets as well as the optical LED lenses from time to time. For safe operation it is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build up on, or within the fixture. Otherwise the fixture's light-output will be significantly reduced or damages can occur.
German Light Products® 6 Technical Specifications Power supply Power consumption 350 VA (Watt) Power Input ~100-240 V AC, 50-60 Hz (wide range input) Fuse protection Micro-fuse 5x20 mm, T5A Operational Parameters Max.
www.glp.
German Light Products® 8 Index beam-lights .................................................... 6 BGV C1............................................................ 7 Mounting in hanging Position.......................... 8 Mounting in sidewise Position......................... 9 Mounting on the Floor ..................................... 8 C N B Camlock ........................................................... 8 Cleaning......................................................... 18 Compress-Mode ....
www.glp.de 9 Pattern Patterns are grouped into two sets which can be activated and selected via the DMX channel "Special". Choose the desired pattern by its corresponding DMX value on channel "Pattern". Orientation: Patterns are shown when looking at the front of a standing fixture; Head faced in direction of fixtures front label: DMX Pan @ 128; Tilt @ 220; Zoom @ 255 (letters are displayed homogenous).
German Light Products® DMX Pattern DMX Pattern DMX Pattern DMX 052 069 086 103 053 070 087 104 054 071 088 105 055 072 089 106 056 073 090 107 057 074 091 108 058 075 092 109 059 076 093 110 060 077 094 111 061 078 095 112 062 079 096 113 063 080 097 114 064 081 098 115 065 082 099 116 066 083 100 117 067 084 101 118 068 085 102 119 Software version 1.18/18/12/10/n – Instruction Manual Rev.
www.glp.
German Light Products® DMX Pattern DMX Pattern DMX Pattern DMX 188 205 222 239 189 206 223 240 190 207 224 241 191 208 225 242 192 209 226 243 193 210 227 244 194 211 228 245 195 212 229 246 196 213 230 247 197 214 231 248 198 215 232 249 199 216 233 250 200 217 234 251 201 218 235 252 202 219 236 203 220 237 204 221 238 Software version 1.18/18/12/10/n – Instruction Manual Rev.
www.glp.