User manual

GLP  German Light Products GmbH
impression X4 L User Manual Rev. B from software version: v045 7
For the various mounting positions of the IMPRESSION X4 L (standing on the
floor, sideways or hanging) different accessories kits are available. Through this
a safe and firm installation is assured. You'll find dedicated connectors on the
bottom side of the fixture which should be used. In addition the base is marked
with a FRONT arrow allowing consistent orientation during installation.
Base plate view:
3.1.1 Operating on the Floor (upright)
To operate the IMPRESSION X4 L in an upright position, please use the dedicated
tri-legged floor stand supplied with your fixture. It is fixed to the base of the fixture
with fasteners called Camlock quick-release connectors. Insert the two fasteners
and turn each 90° to lock them. Do the opposite to release them again. On both
sides you'll find eyelets to pull though a fixing strap. This allows for additional
bracing of the fixture.
2 x M10
length max.16mm
4 x Camlock
quick release
fasteners