User guide

Be sure the pins on the back of the gauge are correctly configured for your vehicle’s engine by following the table below.

 Note: The 8

position in the VIN number is the Engine Code

03-07 Dodge Ram with the 5.9 Cummins

99-Mid 04 Chevy/GMC Duramax

 LB7 Vin Code 1

Mid 04-05 Chevy/GMC Duramax

 LLY Vin Code 2

Both 1 and 2 Switches in the Up Position

07.5-2010 Dodge Ram with the 6.7 Cummins

06-07Chevy/GMC Duramax

 LBZ Vin Code D

07-11Chevy/GMC Duramax

 LMM Vin Code 6

Both 1 and 2 Switches in the Down Position

Additional Installation Information & Material Requirements

 GlowShift Gauges Approved Conductor Wires: Successfully installing GlowShift Gauges may require lengths of wire (sizes and quantity

depend on vehicle, gauge type, gauge location and / or sensor location). For correct and proper GlowShift Gauge installation and operation, the

use of 18 Gauge (wire diameter) automotive grade conductor wire with sheathing is recommended for one or more gauges per vehicle. When

installing and routing wires from the engine compartment, to inside the vehicle cabin, always employ the use of a rubber grommet. This will

prevent and deter the stripping of power supply and / or sensor wires that is necessary to deliver vital statistics about your engine to your

GlowShift engine monitoring instruments. Never use wire nuts to fasten or bound vehicle / gauge or sensor wiring. Always use securing crimp

connectors or solder individual wire junctions together for optimum gauge installation and operation.

 GlowShift Gauges Approved Installation Accessories: GlowShift Gauges may require the installer or user to provide additional products,

accessories or adapters for the correct installation and operation of a gauge or sensor, as per the GlowShift Installation Instructions. When

installing and routing hoses to or from the engine compartment, to inside the vehicle cabin, always employ the use of a rubber grommet. This

will prevent and deter the stretching or pinching of hoses that is necessary to deliver vital statistics about your engine to your GlowShift engine

monitoring instruments.

 GlowShift Gauges Installation Instructions: Installation documents are solely to provide a guide for individuals that are mechanically and

electronically able to install products. If you are unsure about the correct procedure of installation for a product or device, you should consult a

licensed professional.