Owner manual

0020096883_02 - 08/10 - Glow-worm
- 17 -
INSTALLATION
i
When connected for the rst time, the installation
menu is displayed.
• Use the buttons to select
a language.
• Press the button
to conrm.
• Enter the installer access code 96
with the buttons .
• Press the button
to conrm.
12.1 Conguringtheinstallation
• Follow and conrm the steps
prompted by the initial installation
aid.
• Press the button
to conrm.
Your system corresponds to diagram
number "9" in the control unit.
• Choose diagram number "9" with the
buttons
.
• Press the button
to conrm.
Multizone kit' refers to zone valves for
more than one heating zone.
• If so, choose "YES".
• Use the button
to conrm and
follow the control unit instructions.
• If this is not the case and the
installation has only one zone, choose
"NO" with the buttons
.
• Press the button
to conrm.
This screen is only displayed if you
answered “YES” to the previous
question.
• Select number of heating zones
present on the system using the
buttons
.
- Z20 kit = 2 heating zones
- Z11 kit = not available
- Z30 kit = 3 heating zones
• Press the button
to conrm.
• Using the buttons ,
select DHW cylinder on the screen,
if the option is installed.
• Press the button
to conrm.
• Select the corresponding cylinder
type using the buttons .
• Press the button
to conrm.
The control unit summarizes your
installation.
• If this is correct, conrm with the
button
.
• If it is not correct, press the button
and change the data you
introduced.
• Press the button .