Instruction Manual

0020096883_01 - 06/10 - Glow-worm
- 27 -
INSTALLATION
12.9.3 System information
Using the buttons ,
select System on the screen.
Press the button
to con rm.
This screen indicates:
- the external temperature,
- the heating circuit pressure.
To access the information relative to
the components, press
and con rm with the button
.
Press the button to consult the
fault report.
To reset the fault report, press
and con rm with the button
.
12.9.4 Information on heating zone
Using the buttons ,
select Heating zone on the screen.
Press the button
to con rm.
This screen is only displayed if you
have installed more than one heating
zone.
Select the zone you want to consult
using the buttons
.
Press the button
to con rm.
This screen indicates:
- the heating circuit temperature setting,
- the temperature of the room in which
the room thermostat is located,
- whether the heating zones respond to
a demand (ON or OFF),
- the status of the 2-way valve (ON or
OFF).
12.9.5 Information about the domestic hot water
cylinder option
i
This menu is only available if you have chosen the
domestic hot water tank option.
Using the buttons ,
select DHW cylinder on the screen.
Press the button
to con rm.
This screen indicates:
- The set point of the DHW cylinder.
- whether the DHW cylinder respond to
a demand (ON or OFF),
- The status of the domestic hot water
tank valve (ON or OFF),
- The temperature of the hot water
measured by the tank sensor.
12.10 Options
Using the buttons ,
select Parameters on the screen.
Press the button
to con rm.
This menu allows you to:
- change the language of the control
unit menus
- adjust the brightness and contrast of
the screen
- to display the versions of system’s
software.