Manual

0020096317_01 - 08/10 - Glow-worm
- 19 -
INSTALLATION
Select the corresponding cylinder
type using the buttons .
Press the button
to conrm.
The control unit summarizes your
installation.
If this is correct, conrm with the
button
.
If it is not correct, press the button
and change the data you
introduced.
Press the button .
12.2 Wiring summary
e
To check or modify a connection:
Set the control box switch to the Off (O)
position.
Set the circuit breaker located on the
electrical panel and connected to the control
box to the Off position.
Press the button .
Via the screen, you will be asked to
verify, step by step, the connections you
made to the control unit.
If the connections are correct,
conrm with the button
.
If they are not correct, disconnect
the control unit’s power supply and
complete the necessary wiring as
indicated.
Once completed, connect on the
control unit’s power supply and
conrm with the button
.
Once the control unit has been
reconnected, it returns to the current
control function.
Press the button .