Owner manual

0020096321_01 - 02/11 - Glow-worm

- 19 -

Information on heating zone

1 Select Status reports on

the screen.

2 select Heating zones on

the screen.

3 Select the zone you want to

consult.

4 Consult the heating zones

information.

Information about the domestic hot water cylinder option

This menu is only available if you have chosen the domestic hot

water cylinder option.

1 Select Status reports on

the screen.

2 Select DHW cylinder on the

screen.

9 Re-check and restart

• Once the system is installed, check the operation of each appliance.

• Start the system to ensure that any adjustments operate correctly

and check that the appliances operate safely.

• Reset the fault reports for all appliances. To do this, refer to

the "Component info." section.

• Check the water-tightness of the appliances and eliminate any

leaks.

• Check the entire control and safety system, settings and operation.

• Start the "Self check" procedure to test the system connections.

10 User information

At the end of the installation, the installer must:

- explain the operation of the appliances and its safety devices

to the user, if necessary provide a demonstration and answer

any questions;

- hand over to the user all the required documentation,

- advise the user of the precautions necessary to prevent

damage to the system, appliances and the building;

- remind the user to service the appliances annually.

The user shall not interfere with or adjust sealed components.

Any servicing must be carried out by a competent person

approved at the time by the Health and Safety Executive.

INSTALLATION