Installation & Assembly

Crystal trimming instruction
for: #616EM44SP
Your crystal fixture is packed to include extra pins and crystal pieces for future use. These extra parts may come in handy if a piece or two is chipped or misplaced while the fixture is
being untrimmed. As they may be useful in some future days, please store them safely.
Cleaning Instructions
Your fixture requires regular cleaning and, depending on the volume of traffic where your fixture is displayed, the frequency may vary. We recommend the following steps for cleaning.
Caution: When Trimming or Un-trimming your fixture, never attempt to rotate or counter rotate your fixture as it may result in the risk of fire, electric shock, personal injury and property
damage. Caution: If the fixture is displayed beyond reach, you are advised to have a professional cleaner to perform the cleaning as it may result in the risk of fire, electric shock,
personal injury and property damage.
1. Retrieve the copy of Trimming Instructions, packed with the fixture when it was purchased.
2. Study and Identify all the crystal strands from the trimming instructions and the fixture. Please note how the fixture was trimmed originally, the strand “A” was trimmed first. However,
when un-trimming the fixture, the order is backwards. With care, remove, starting from the higher alphabetic number first, all the identical strands of crystal, place them aside, and
make a note to label these strands of crystal according to the trimming instruction.
3. Continue to un-trim as 2 above until you reach the last strand labeled “A”.
4. With a lint-free cloth and some lukewarm water solution, mixed at a ratio of 100 parts water to 1 parts of white vinegar, wipe each of the crystal strands clean until satisfactory.
5. Ensure the power to the fixture is turned off and the light bulbs are cooled down, use a lint-free cloth and ring out dry with some lukewarm water, mixed as 4 above, wipe the fixture
clean until satisfactory. Caution: ensure no water is dripped into any electrical components as it may result in the risk of fire, electric shock, personal injury and property damage.
6. Re-trim your fixture, starting from the strand “A”, until the last strand is complete.
CARE PACKAGE
®
Glow Lighting Inc.
CUSTOMER COPY
09.11.15
1 Package contain
A1, A2, A3=19 strand
(1 strand extra include)
Require x 5 Package
for this fixture
CAUTION RISK OF FIRE
MAX 50 WATTS,
TYPE Gu10 LAMP
Top-View
Side-View
End with the
longer strand
Start with
the shortest
Finish View with
shortest & the longer
strand together
The Round
Plate
A1
A2
A3
Package #1
B1
B2
B3
Package #2
C1
C2
C3
Package #3
Total
5
Package
D1
D2
D3
Package #4
E1
E2
E3
Package #5