User's Manual

ManualsBrandsGlosys ManualsAutomotiveIn-vehicle Infortainment System

HD 360 View Camera System

Your motorhome is equipped with a High Deﬁnition (HD) Camera System that is

integrated with the Infotainment Center to provide on screen user interface to

control camera views. This system contains four (4) high deﬁnition cameras

and (2) SD cameras and a control box.

Graphical User Interface (GUI) will disappear after few seconds of inactivity on

the touch screen. To bring back or hide the GUI, tap anywhere on the bottom

screen.

Functions:

1. Lock Button - locks the screen to the current view. Manual selection and

automatic triggers cannot overwrite it.

2. Left View - may be selected manually for a wide angle view of the left-hand

side of the motorhome.

3. Right View - may be selected manually for a wide angle view of the

right-hand side of the motorhome.

Page 2

CAMERA OPERATION

4. Rear View - It is triggered automatically when the reverse gear is active, or it can

be selected manually by tapping the icon on the screen once. When active, three

(3) additional views appear (points 10, 11, and 12) on the right-hand side of the

screen. These views are Horizon, Normal, and Hitch, from top to bottom,

respectively.

5. Front View - Shows the front camera view.

6. Left/Right Split View - shows a side by side view of both HD side cameras.

7. Left/Right/Rear View - shows a side by side view of both HD side cameras

and rear camera below.

8. Security view - Uses all 4 cameras to show wide angle views around coach.

9. 360 View - Shows a split screen of the rear camera and a top down view of

the coaches surroundings.

10. Rear Horizon View* - it uses the rear camera with increased ﬁeld of view. It

provides the ability to see the entire area behind the motorhome up to the

horizon. This is especially useful when wanting to see a towed vehicle or trailer.

11. Rear Normal View* - It uses the rear camera with zoomed-in ﬁeld of view of

the Horizon to assist with reversing the motorhome. This view is also a default

view for automatic trigger when reverse signal is detected.

12. Rear Hitch View* - It uses the rear camera with zoomed-in ﬁeld of view of

the Horizon to focus on the hitch area, useful for when connecting a trailer.

In addition to these manually selectable views, there are also automatic views

that are triggered with turn signals:

13. Left SD/ Left turn signal view - pressing the Left button or using the left turn

signal will bring up the SD camera view from the mirror mounted camera.

14. HD - brings you to the HD camera selection screen.

15. Right SD/ Right turn signal view - pressing the Right button or using the

Right turn signal will bring up the SD camera view from the mirror mounted

camera.

* Available in Rear View only.

Page 30

13 14 15

2 3 4 5 6 7 8 9