Manualshelf

User's Manual

ManualsBrandsGlosys ManualsElectronicsIn-vehicle Infotainment System
11121314151617181920
3. Setup
XiteSolutions North America Inc.
11
Settings
Access the Settings by selecting the Setup icon in the Main Menu. There are three
Settings that can be changed and these are System, Video, and Audio. In addition,
there are Settings for Radio, Sirius XM, and Bluetooth and to access these, you
must go to the setup icon while one of these sources is active.
To exit the Settings menu at any time, press the Settings icon in the top left of the
screen.
3.1 System Setup
By touching the SYSTEM button, the settings for the system part of the Infotainment
Center can be changed.
Beep Tone: Turn ON/OFF audible sound when touching the LCD screen. The
Beep tone will also provide warning of LCD display closing and other cues.
Rear View: When ON, the display will automatically switch to camera mode
when the reverse gear is engaged or a trigger signal is received. When no camera
is connected, select OFF.
Standby Screen: Selecting ON, the Infotainment Center will display logo, date,
time and temperature when the unit is powered off by pressing and holding the
power button (rotary button) while the vehicle remains on.
Language: The language of the user interface can be selected from the following
options: English, Spanish, or French.
Auto dim: The brightness of the LCD display will be adjusted depending on the
selected preference: Sensor / Manual / Auto / Auto(GPS).
Sensor option uses LDR (please see function 2 of the section 2.1 in this manual for
more information). Cannot be adjusted via DIM button.
Manual always stays on the selected level (1 through 5). Can be adjusted via DIM
button
Auto uses illumination signal from the vehicle to determine what level to set the
brightness to. Can be adjusted via DIM button.
Auto (GPS) uses information from GPS to determine what level to set the brightness
to. Can be adjusted via DIM button.
Screen Saver: Can be turned ON and OFF. When ON, the screen will enter
sleep mode after a period of no user interaction.
Temperature: Select units (Fahrenheit or Celsius) to display temperature in the
Information Bar. Temperature display can be turned off.