User's Manual

2 Main Unit Display

The buttons located on the Infotainment Center front display are assigned the same reference here below.

PWR

1. Turn on the ignition to power up the Infotainment Center. When the Infotainment Center is started

up, it will immediately go to the last mode (memory on playback) before it was turned off.

2. In order to put the unit in standby mode, please press the Power button (PWR). During standby, the

display will show your vehicle logo, time, date and outside temperature. Press the Power button again

to start up again.

3. In order to turn the unit off completely remove ignition key and/or ensure any auxiliary battery power

to the system is turned off.

1. Touch the Menu button to go to the Main Menu.

2. When in the Main Menu, use the touch screen to select the desired functionality.

3. You can also access the Main Menu from any screen by touching the function icon in the top left of

the current screen.

NOTE: When viewing video in full screen please touch the screen once to bring up the screen header

which will display the function icon. Touch the icon to return to the Main Menu.

DIM

1. Press to manually adjust the brightness of the LCD.

-/+ VOLUME CONTROL

1. The volume level can be adjusted on the front of the Infotainment Center display by using the volume

up and volume down buttons or by the steering wheel control buttons (optional).

2. The volume level can be muted completely by briefly pressing the MUTE button on the front of the

Infotainment Center. The MUTE logo will appear the display.

PIP (Picture in Picture)

1. Your Infotainment Center is equipped with PIP. This button will toggle between PIP and full screen of

the active source (see page 11 for more details on this feature).

NAVI

1. Press the NAVI button to go to the navigation system.

2. While viewing your navigation press the NAVI button to return to your active source. If you are

running a navigational route, audio voice prompts will continue to be heard over your speakers

according to the NAVI audio settings you have selected in the settings menu (see page 11).

3. To hear only your navigation audio voice prompts press and hold the NAVI button for 2 seconds. This

will mute your current audio source until you leave the navigation screen.

MUTE

1. Press to Mute all audio including navigation prompts