User's Manual

7 DVD/VCD Player Operation

(Please refer to the safety instructions in regard to video playback on page 3)

CD/DVD mode can be selected from the Main Menu by pressing the DVD icon on the LCD display. The CD/DVD

mode can be left at any time by pressing the Disc icon at the top left of the CD/DVD screen.

Disc Insert/Eject

1. Press the EJECT button located beside the DVD slot.

Please see dealer for location of DVD slot.

2. Place the DVD (label side up) into the CD/DVD slot. Push

the disc in gently until the loader inserts the disc itself.

3. After inserting the disc, playback will start automatically

and the DVD mode’s playback is shown on the display.

While a DVD is playing full screen, press the display once to see

the DVD control interface. The control interface allows all the

settings for DVD playback. On the bottom all normal functions are

available (as with CD player operation) with the added MENU, Audio, Sub Titles, Angle and Chapter Search

buttons.

DVD Audio track selection can be made by pressing this icon and cycling through the audio tracks

available on the DVD. Note: when a DTS audio track is selected, no audio will be available.

Some DVD’s support multiple angle views. Pressing this icon will switch between each available angle.

DVD’s will allow several subtitles to be blended into the video file. Press this icon to select subtitle.

Press to go to the DVD Main Menu

Press for Chapter Search. A keypad will be visible on the left side of the LCD screen. Enter the chapter

number to jump to.

Note: The options for these functions are dependent on the contents of the DVD.

7.1 DVD System Settings

To access the DVD Settings in the System Settings Menu from the DVD Screen:

1. Touch the DVD icon in the top left corner of the screen to return to the Main Menu.

a. If you are watching a video full screen please touch the screen once to bring up the Icon

header then perform step 1 above.

2. Select Settings icon.

3. Select DVD Set on left side.

DVD Settings page:

Audio Language: This option sets the default audio language the

DVD should start in (when available on the DVD).

Menu Language: Choose the language for menu display.

Subtitle Language: This option sets the default subtitle language

the DVD should start in (when available on the DVD).

DVD Aspect: The following options are available: Pan Scan–-

Wide – Letterbox.

Video System: The following options are available: NTSC – PAL –

AUTO.

DRC: This option turns the Dynamic Range Control ON or OFF.