User's Manual

3 Setup

3.1 General Settings

Access the System Settings by using the Settings icon in the Main Menu. The first screen

shown is the first page of the system setup. The pages of the Settings menu can be

changed by using the on-screen button in the top right corner. To exit the Settings menu

at any time, press the Settings icon in the top left of the screen.

System Settings page one (1/2):

AUX Zone: This option selects the AV source for a display

connected to the AV output. The following sources can be

selected: Current/DVD/CAM/NAV/AUX/OFF. Audio only sources

of Radio/SIRIUSXM/iPod may be selected. Control of most

functions must be done from the main screen.

Beep Tone: Turn ON/OFF audible sound when touching the LCD

screen. The Beep Tone will also provide warning of LCD display

closing and other cues.

Rear View: This option selects whether a rear view camera is

connected. When ON the display will automatically switch to

camera mode when the reverse gear is engaged or a trigger signal is received. When no camera is connected,

select OFF.

NOTE: Please use all available safety features and procedures to ensure proper driving to avoid damage and/or

injury.

Standby Screen: Selecting ON, the Infotainment Center will display your clock when the unit is powered off by

press and hold the PWR button while the vehicle remains on.

Language: Here the language of the User Interface can be selected (English, Spanish, French).

Auto Dim: Set to Auto, LCD will dim with your vehicle lighting, if equipped. Set to sensor, the LCD brightness

will change based on the light levels within the driver area regardless of dash illumination.

Temperature: Select units to display temperature (optional).

System Settings page two (2/2):

Compass Display: Select Direction or Bearing (Optional).

Auto Clock Set: When ON displayed time is managed by GPS.

Time Set: This option allows setting the time in the system

displays.

Touch Adjustment: This option allows the user to calibrate the

touch screen accuracy. Follow the on-screen directions step by

step to complete the procedure. This procedure is only necessary

when the accuracy of the touch screen is not good.

Factory Set: With this option, the Infotainment Center can be

reset to factory default.

Note: All stored settings, presets, SIRIUSXM content alerts, etc., will be erased and return to original factory

settings. Locked/Skipped channels, lock code in SIRIUSXM will remain unchanged.