User's Manual

3.Setup
XiteSolutions North America Inc.
10
3.1 General Settings
Access the System Settings by using the Settings icon in the Main Menu.
The first screen shown is the first page of the system setup. The pages of the
Settings menu can be changed by using the on-screen button in the top right corner.
To exit the Settings menu at any time, press the Settings icon in the top left of the
screen.
System Settings page one (1/3):
Tilt Position: This option allows the manual control of the tilt mechanism behind the
LCD screen. Here you can set the angle of the LCD display
Tilt Movement: The LCD panel will close during power down and return to its set
position if Auto is selected.
AUX Zone: This option selects the AV source for a display connected to the AV
output. The following sources can be selected: Current/DVD/CAM/NAV/AUX/OFF.
Audio only sources of Radio/SIRIUSXM/iPod may be selected. Control of most
functions must be done from the main screen.
Beep Tone: Turn ON/OFF audible sound when touching the LCD screen. The Beep
Tone will also provide warning of LCD display closing and other cues.
Rear View: This option selects whether a rear view camera is connected. When ON
the display will automatically switch to camera mode when the reverse gear is
engaged or a trigger signal is received. When no camera is connected, select OFF.
Standby Screen: Selecting ON, the Infotainment Center will display your clock
when the unit is powered off by press and hold the PWR button while the vehicle
remains on.
NOTE: Please use all available safety features and procedures to ensure proper driving to
avoid damage and/or injury.
