XSG2NA-X2 INFOTAINMENT CENTER Owner’s Manual 1 XiteSolutions North America Inc.
Disclaimer Before using this product, please read this manual fully to ensure correct operation. Keep the manual at hand for future reference. 9.4.3 Mature Channel Locking………………………………………..27 Content.…………………………………………………..…………………2 9.4.4 Channel Locking……………………………………………...…27 Disclaimer……………………………………………………………….. 3-5 9.4.5 Channel Skip…………………………………………………….27 1. Features………………………………………………………………….6 9.5 Artist & Song Alerts…………………………………………………28 2. Main Unit Display……………………………………………..……....7-9 9.5.
Disclaimer AND YOUR USE OF THE PRODUCT. YOU ASSUME TOTAL RESPONSIBILITY AND RISK FOR USING THIS SYSTEM. Failure to properly focus on the operation of your motor vehicle can result in death, serious injury and property damage. The Infotainment Center should never be used at a time or in a manner that distracts you from properly focusing on operation of the motor vehicle in which it is installed.
Disclaimer IMPORTANT SAFETY INFORMATION Safety Information Read the operating instructions for the Infotainment Center and all other components of the system carefully before using the system. FAILURE TO OBSERVE THE INSTRUCTIONS GIVEN IN THIS MANUAL MAY CAUSE INJURY OR DAMAGE AND VOID THE WARRANTY. Warnings! Observe the following warnings when using this unit: • • • • • The driver should neither watch the display nor operate the system while driving.
Disclaimer Notes on Use: Video Sources and On-Screen Display • • • Your Infotainment Center is designed to only display video when the parking brake is fully engaged. Never attempt to circumvent, defeat or bypass any of these safety features. These designs are intended to reduce driver distractions. Failure to use the safety features as designed could lead to serious injury, death and property damages. Your manufacturer and partners will not be liable for any injury or loss.
1. Features Motorized 6.
2. Main Unit Display The buttons located on the Infotainment Center front display are assigned the same reference here below. Main unit buttons 1 1. PWR (Power On/Off) or Mute 2 2. Mode (Main Menu) 3 3. DIM 4 4. Volume Down 5 5. Volume Up 6 6. FAV 7 7. Navigation 8 8. Eject 9 9. Bluetooth Microphone 10 IR Receiver 1 2 3 9 4 5 6 7 8 10 7 XiteSolutions North America Inc.
2. Main Unit Display POWER 1. 2. 3. 4. NAVI Turn on the ignition to power up the Infotainment Center. The buttons on the front of the unit light up. When the Infotainment Center is started up, it will immediately go to the last mode (memory on playback) before it was turned off. In order to put the unit in standby mode, please press the Power button (PWR) for more than 2 seconds. During standby, the display will show your vehicle graphic or be off.
2. Main Unit Display 2.1 Main Menu The Infotainment Center is designed for simple maneuvering throughout. The screen shown on the left is the MAIN MENU screen. From here you can choose which function to access by tapping the appropriate icon on the LCD display. To return back to the Main Menu or change the active source touch the icon in the top left corner of any screen.
3. Setup 3.1 General Settings Access the System Settings by using the Settings icon in the Main Menu. The first screen shown is the first page of the system setup. The pages of the Settings menu can be changed by using the on-screen button in the top right corner. To exit the Settings menu at any time, press the Settings icon in the top left of the screen. System Settings page one (1/3): Tilt Position: This option allows the manual control of the tilt mechanism behind the LCD screen.
3. Setup System Settings page two (2/3): Language: Here the language of the User Interface can be selected (English, Spanish, French). Auto Dim: Set to Auto, LCD will dim with your vehicle lighting, if equipped. Temperature: Select units to display temperature (optional). Compass Display: Select Direction or Bearing (Optional) Time Set: This option allows setting the time in the system displays. Select Auto to allow your time to be maintained by the GPS.
3. Setup By tapping the VIDEO button, the settings for the video part of the Infotainment Center can be changed. 3.2 Video Settings Brightness: Sets the brightness level (-10 – +10). Contrast: Sets the contrast level (-10 – +10).Tint: Sets the tint level (-10 – +10). Tint: Sets the color level (-10 – +10).
3. Setup 3.3 Audio Setup By touching the AUDIO button, the settings for the Audio part of the Infotainment Center can be changed. Audio Settings page one (1/2) Treble: Sets the treble level (-10 – +10). Mid: Sets the mid level (-10 – +10). Bass: Sets the bass level (-10 – +10). Equalizer: Here a selection can be made for the equalizer to fit a music style.
4. Radio Operation Radio mode can be selected from the Main Menu by pressing the Radio icon on the LCD display. The Radio mode can be left at any time by tapping the Radio icon at the top These six buttons used to switch to a button radio station the memory by tapping left of the Radio screen. The radio interface contains several buttons that all have their specific purpose. Belowcan is anbeexplanation of each and itsinfunctionality. 7 1 10 8 11 9 4 6 5 8 2 9 PTY means Program Type.
5. USB‐MP3/WMA/MP4 Player Operation This is the icon for a JPEG image. The Infotainment Center also has the ability to show JPEG images (please see safety instructions). When a JPEG is selected, a slideshow will automatically be created of all the available images within a folder. This is the icon for a MP3 file. When a file is selected from the track list, the playback of this file will be started automatically. This is the icon for a WMA file.
6. CD/DVD Operation 4 5 6 7 1 2 3 4 5 6 7 Tap once to skip to next track. Press and hold to fast forward within a track. Tap to set how the CD player should play back the available tracks. The available options are RPT ALL (normal playback), RPT 1 (repeat one track) or RPT OFF. This is the random option that will allow random playback of the available tracks. Tap once to enable random playback, press again to return to normal playback.
7. DVD/VCD Player Operation (Please refer to the safety instructions in regard to video playback on page 5) 1 DVD Audio track selection can be made by Tapping this icon and cycling through the audio tracks available on the DVD. Note: when a DTS audio track is selected, no audio will be available. 2 DVD’s will allow several subtitles to be blended into the video file. Tap this icon to select subtitle. 3 Some DVD’s support multiple angle views. Tapping this icon will switch between each available angle.
7. DVD/VCD Player Operation (Please refer to the safety instructions in regard to video playback on page 5) 7.1 DVD System Settings To access the DVD Settings in the System Settings Menu from the DVD Screen: 1. Tap the DVD icon in the top left corner of the screen to return to the Main Menu. a. If you are watching a video full screen please tap the screen once to bring up the Icon header then perform step 1 above. 2. Select Settings icon. 3. Select DVD Set on left side.
8. Bluetooth Operation Bluetooth mode can be selected from the Main Menu by tapping the Bluetooth icon on the LCD display. The Bluetooth mode can be left at any time by tapping the Bluetooth icon at the top left of the Bluetooth screen. The Infotainment Center supports Bluetooth wireless connections. It can set up a wireless link with a Bluetooth mobile phone. The unit supports a hands-free profile and A2DP (Audio Advanced Distribution Profile).
8. Bluetooth Operation Notes on Pairing: 1. 2. 3. 4. 5. 8.2 Pairing your Phone To pair your compatible mobile phone to the Infotainment Center please have your user manual for your mobile phone and follow the instructions below: 1. 2. 3. 4. 5. 6. Go to the Bluetooth screen by selecting the Bluetooth icon from the Main Menu. When Bluetooth is accessed for the first time, it will show NO CONNECTION on the screen. to access the device list. Tap to start pairing mode.
8. Bluetooth Operation Notes on Phonebook Feature: 1. 2. 3. 4. 5. 6. 7. 8. The Phonebook function is matched with OPP (Object Push Profile) or PBAP (Phonebook Application Protocol) in user's mobile phone. To update changes to the phonebook of a paired mobile phone, you must perform the phonebook download step again. The contents in incoming call list, outgoing call list, and missed call list will be only call lists when system and mobile phone are paired. Number of paired devices: max.
8. Bluetooth Operation 8.3 Incoming Calls While the mobile phone is connected, incoming calls will be handled by the Infotainment Center. When an incoming call is present, the LCD display will switch to Bluetooth mode and show the phone number (when available) from the person calling. Under the phone number, the buttons Accept and Reject are present. Tap to accept the call. The Infotainment Center will accept the call and give the call audio over the normal car speakers. Tap to reject the call.
8. Bluetooth Operation Phonebook Dialing Calls can be made by accessing your downloaded phonebook. 1. Tap to access your Phonebook. 2. Tap the contact name on the right you wish to call. 3. Tap the number you wish to call. 4. Tap the green phone icon. Note: Outgoing calls can also be made on the mobile phone itself. The Infotainment Center will still take over the outgoing call and switch to hands-free mode 8.
9. SiriusXM Satellite radio Everything worth listening to is on SiriusXM, getting over 130 channels, including the most commercial-free music, plus the best sports, news, talk and entertainment. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com. To activate SiriusXM Canada service go to www.xmradio.ca and click on “ACTIVATE RADIO” in the top right corner, or call 1-877-438-9677.
9. SiriusXM Satellite radio 9.2 Operating SiriusXM Satellite Radio The display for the SiriusXM mode is laid out to provide you with the required information and icons to allow maximum enjoyment of your SiriusXM subscription. 11 9 1 10 8 7 6 3 2 Pressing the “FUNC” button will toggle between function buttons. CAT, CAT+, SCAN, P.DEL will change to ALERT, ALERT+, SKIP, LOCK. See below to learn more about each function.
9. SiriusXM Satellite Radio 9.3 Tuning to a channel Press once to tune to the next/previous channel. Press and hold to rapid tune. To page through a channel or category list press found to the right of the channel list 1 1 2 3 The Infotainment Center will store up to 18 preset stations of your choice. Press BAND to go to the next series of preset channels (3 Bands X 6 Presets). 5 These Preset buttons allow direct tuning to your favorite stored channels. 1.
9. SiriusXM Satellite Radio Once you have successfully entered the lock code SiriusXM will remain in Unlocked mode until the Infotainment Center is turned off, put into standby mode or you repeat step one above. 1 9.4.3 Mature Channel Locking The Infotainment Center is set to default the Mature Channel Locking to OFF. This feature will automatically lock all mature themed channels determined by SiriusXM.
9. SiriusXM Satellite Radio 9.5 Artist & Song Alerts While listening to SiriusXM Satellite Radio, you can be alerted when your favorite songs or artists are playing on other channels. You can store up to 50 of your favorite Artists and 50 favorite songs. The Infotainment Center will display an Alert message when a matching artist or song is found on another channel or you can choose either My Artists or My Songs categories to have access to all channels that have current alerts playing.
9. SiriusXM Satellite Radio 9.6 Replay The Replay feature allows you to pause, rewind, and replay up to 60 minutes of live SiriusXM Satellite Radio. The status bar shows you the current buffer capacity. Once full, the oldest track will be removed allowing the newest live track to be added. If you have paused playback and the paused track is about to be erased, the XSG2 will notify you will an audible beep. Playback will resume from the next track in the buffer. 1 1 Press to enter Replay Mode.
9. SiriusXM Satellite Radio 9.7 SiriusXM Settings Menu There are many features that can be changed to customize your SiriusXM Radio experience. To enter the SiriusXM settings menu you must currently have SiriusXM selected. From there press the SiriusXM icon top left corner of display, Select Settings Icon. From the Settings page there is a SiriusXM option at bottom left. Selecting this button will display page 1 of 2 for SiriusXM settings.
9. SiriusXM Satellite Radio 9.8 Understanding SiriusXM Advisory Messages Check Antenna The radio has detected a fault with the SiriusXM antenna. The antenna cable is either disconnected or damaged. Verify that the antenna cable is connected to the SiriusXM Connect Vehicle Tuner. Inspect the antenna cable for damage and kinks. Replace the antenna if the cable is damaged. Check Tuner The radio is having difficulty communicating with the SiriusXM Connect Vehicle Tuner. The tuner may be disconnected or damaged.
10. iPod and iPhone AV Interface The Infotainment Center can also be connected to your Apple iPod or iPhone. When the iPod is connected, press the iPod icon in the Main Menu. The iPod mode can be left any time by pressing the iPod icon at the top left of the screen. To access and use the iPod feature please connect your iPod/iPhone device first to the iPod cable provided. 1 2 3 4 5 1 2 3 4 5 6 7 6 7 FUNCTIONS Change the track list to find tracks based on categories.
11. Camera (Optional) Automatic Viewing: The Infotainment Center can support automatic triggers to display cameras to assist you with reverse driving and side blind spot viewing. While driving, if a turn signal or reverse gear signal is seen by the system the display will change to full screen camera view. If your rear camera is equipped with audio, you can press the Audio icon on the LCD display while the camera video is displayed to change the audio from the active source to the camera audio.
12. Navigation (Optional) The Infotainment Center is capable of providing navigation. If you have purchased this option please see your Navigation Program User Manual for instructions on using the navigation software. If you are using the Premium Remote Control accessory to operate your navigation please ensure that the Navigation is the current display (full screen) on the Infotainment Center. This is required even if the auxiliary monitor currently displays navigation as well.
13. Premium Remote Control (Optional) The Infotainment Center is compatible with the Premium Remote Control accessory. No.
13. Premium remote control (Optional) To use the Premium Remote please reference the chart below view the functionality the remote will provide for each feature of your Infotainment Center. The remote will only control the current function on the main LCD display. ** System (These functions available with all features of the Infotainment Center) Key Function Description Power Turns Power ON/OFF to Infotainment Center 1 3 Mode 2 29 28 26 Mute Setup Nav Volume up Return to Main Screen.
13.
Customer Feedback Your Infotainment Center has been designed specifically for use in Recreational Vehicles. This system has been designed to offer a rich and intuitive feature set that is simple to use and even easier to enjoy. We have engineered this system based off input from real RV’ers like you! We want your feedback.
Product Registration Please take a moment to fill out your Infotainment Center Registration Card and mail it to the address provided on it or contact us by phone or email at the address below. By registering your product you will be kept up to date on any enhancements to the Infotainment Center. It will also help us expedite any service or support needs you may have. River Park Inc. 21953 Protecta Drive Elkhart, IN 46516 1-800-442-7717 www.riverparkinc.
Notes 40 XiteSolutions North America Inc.
