CT GENERAL USER MANUAL VERSION: 18042019.01 General Information & Setup Guide Before using this product, please read this manual fully to ensure correct operation. Keep the manual at hand for future reference. All product names, logos, and brands are property of their respective owners. All company, product and service names used in this document are for identification purposes only. Copyright © 2018 Xite Solutions North America. All Rights Reserved | User Manual Version 18042019.
D I SC L A I ME R THIS IS A DISCLAIMER OF LIABILITY AND DAMAGE RESPONSIBILITY IN REGARDS TO THE INFOTAINMENT CENTER MANUFACTURER AND YOUR USE OF THE PRODUCT. YOU ASSUME TOTAL RESPONSIBILITY AND RISK FOR USING THIS SYSTEM. Failure to properly focus on the operation of your motor vehicle can result in death, serious injury and property damage.
SA FE T Y I NFORMATI ON SAFETY INFORMATION Read the operating instructions for the Infotainment Center and all other components of the system carefully before using the system. USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: FAILURE TO READ AND UNDERSTAND THE INSTRUCTIONS GIVEN IN THIS MANUAL MAY CAUSE INJURY OR DAMAGE AND VOID THE WARRANTY.
NOTE ON USE & LEGA L I NFORMATI ON Notes on Use: Video Sources and On-Screen Display • Never attempt to modify, defeat or bypass any of these safety features. These designs are intended to reduce driver distractions. • Failure to use the safety features as designed could lead to serious injury, death and property damages. Your manufacturer and partners will not be liable for any injury or loss. Notes on Use: Liquid Crystal Panel • Do not cause impact to the liquid crystal panel.
D I SP L AY OP E RATI ON 3 CAM 1. Press for instant access to Camera Interface. 1 2 4 3 AUX 1 1. Press for instant access to Radio Interface. 4 5 5 AUX 2 1. Press for instant access to Bluetooth Interface. 6 6 Rotary button VOLUME/MUTE/POWER 1. Turn on the ignition to power up the Infotainment Center. When powered up, it will immediately go to the last mode (memory on playback) before it was turned off. 2. Turn the rotary button left/right to adjust the volume to the desired level.
D I SP L AY OP E RATI ON 1 1 Information Bar 1. The top area of the screen is known as the source information bar, displaying the current source, time and other related information as well as the Bluetooth connection status. Note: One needs to select a source to be able to see all the information mentioned above. Main Menu 1. Infotainment Center is designed for simple maneuvering. The screen shown on the left is the MAIN MENU screen.
SYSTE M SE T TI NGS Settings Access the Settings by selecting the Setup icon in the Main Menu. There are four Settings that can be changed and these are System, Video, Audio and Bluetooth. In addition, there are Settings for Radio, and Bluetooth and to access these, you must go to the setup icon while one of these sources is active. To exit the Settings menu at any time, press the Settings icon in the top left of the screen.
VI D EO SE T TI NGS Video Settings By tapping the VIDEO button, the settings for the video part of the system can be changed. Brightness: Sets the brightness level (-10 to +10). Contrast: Sets the contrast level (-10 to +10). Tint: Sets the tint level (-10 to +10). Sharpness: Sets the sharpness level (0 to 8). Note: The system has a factory default for optimal LCD settings, however the level can be adjusted to set the display according to individual preference.
AUD I O SE T TI NGS Audio Settings By touching the AUDIO button, the settings for the audio part of the system can be changed. Treble Gain: Sets the treble level (-10 to +10). Mid Gain: Sets the mid level (-10 to +10). Bass Gain: Sets the bass level (-10 to +10). Equalizer: Here a selection can be made for the equalizer to fit a music style. The following options are available: FLAT ( normal level ), POP, JAZZ, CLASSIC, LIVE and ROCK Fader: Sets the fader level between rear and front (R10 – F10).
RA D I O OP E RATI ON 1 2 1 9 1 7 5 8 6 These six (6) buttons can be used to switch between the radio stations saved in memory. Tap a button to change the station, or press and hold the button for 2 seconds to save the current station into memory. These are called presets, and there are six for each band. 7 A/S means Auto Store and will store received stations in the memory. Six stations will be stored per radio band.
BLUE TOOTH OP E RATI ON Bluetooth can be selected from the Main Menu by tapping the Bluetooth icon on the LCD display. The Bluetooth can be left at any time by tapping the Bluetooth icon at the top left of the Bluetooth screen. The Infotainment Center supports Bluetooth wireless connections. It can set up a wireless link with a Bluetooth mobile phone. The unit supports a hands-free profile and A2DP (Audio Advanced Distribution Profile).
BLUE TOOTH OP E RATI ON 6. If completed successfully, scan will return a list of available devices that are ready for pairing. Your Infotainment System will be recognized as XSG3. Select XSG3 on your mobile phone to begin pairing. 7. If your mobile phone supports phonebook transfer, tap PHONEBOOK DOWNLOAD will appear on the screen. This will download all of your phone contact into Infotainment Center. Notes on Pairing: 1.
BLUE TOOTH OP E RATI ON Notes on Phonebook Feature: 1. Phonebook function is matched with PBAP (Phone Book Access Profile) in user's mobile phone. OPP (Object Push Profile) can also be used with older phones to push the contacts to the phonebook via Bluetooth. 2. To update changes to the phonebook of a paired mobile phone, you must perform the phonebook download step again. 3.
BLUE TOOTH OP E RATI ON Incoming Calls While the mobile phone is connected, incoming calls will be handled by the Infotainment System. When an incoming call is present, the LCD display will switch to Bluetooth mode and show the phone number (when available) from the person calling. Under the phone number, the buttons Accept and Reject are present (top left screen). Tap to accept the call. The Infotainment Center will accept the call and give the call audio over the normal car speakers.
BLUE TOOTH OP E RATI ON Phonebook Dialing Calls can be made by accessing your downloaded phonebook. 1. Tap to access your Phonebook (top left picture). 2. Tap the contact name on the right you wish to call (bottom left picture). 3. Tap the number you wish to call. 4. Tap the green phone icon. Note: Outgoing calls can also be made on the mobile phone itself. The Infotainment System will still take over the outgoing call and switch to hands-free mode. Copyright © 2018 Xite Solutions North America.
SI NGLE C A ME RA OP E RATI ON Camera Operation Rear Camera is availible. Copyright © 2018 Xite Solutions North America. All Rights Reserved | User Manual Version 18042019.
