Manual

7
Removing of Gas
Hold the magazine at its
bottom. Press the valve
Residual gas may now
be discharged. Escaping
gas may cause icing.
1.
Press the magazine catch.
2.
Remove the magazine.
6.
Turn piercing screw
upwards, pierce capsule.
7.
Insert magazine.
4. 5.
Insert CO
2
capsule
as shown.
3.
Open piercing screw
using Hex key.
CAUTION
• Only use 12 g CO
2
capsules. • For storage remove gas capsules.
• There may be a minor discharge of gas when you remove the gas capsules.
Make sure that your hands do not come into contact with discharged CO
2
gas. This may cause
freezing of the skin. Do not expose the CO
2
cartridge to excessive heat and do not store it at
temperatures exceeding 54°C. Always adhere to the warnings and safety instructions of the
manufacturer on the gas cartridge in respect to handling and storage of a CO
2
gas container.
1.
4.
5.
2.
INSERTING AND CHANGE CO
2
-CAPSULE