Manual

ManualsBrandsGlock ManualsFirearms17-24 semi automatic pistol

GLOCK INSTRUCTION FOR USE

for the Safe Action self-loading pistol

TAKE NOTE:

Always assume that the GLOCK pistol or any other firearm is loaded is capable of being discharged

until you the user, have been personally convinced to the contrary. Until the magazine is removed

and you have inspected the chamber and complete the unloading procedures as presented on page

21, the firearm must be considered to be loaded and capable of being fired. Never aim at persons

when handling the weapon.

To reduce the possibility of an accidental discharge, do not place your finger on the trigger until the

firearm is pointed at the target and you intend to fire. If you don't want the firearm to fire, keep your

finger off the trigger

When firing with a two hand grip, the thumb of the weak hand should be on the weak hand side of

the firearm, never behind the slide.

Before using the GLOCK pistols, the operating instructions and safety information in this manual

must be read and understood.

Any firearm, including the GLOCK pistols, is a dangerous weapon, it must not become

accessible to unauthorised persons, especially children

The manufacturer's warranty and liability is strictly limited to such as contained in the

Terms of Delivery and Sale of GLOCK, Ges.m.b.h.

Place of Jurisdiction: Vienna/Austria

Summary of content (10 pages)

PAGE 1
GLOCK INSTRUCTION FOR USE for the Safe Action self-loading pistol TAKE NOTE: Always assume that the GLOCK pistol or any other firearm is loaded is capable of being discharged until you the user, have been personally convinced to the contrary. Until the magazine is removed and you have inspected the chamber and complete the unloading procedures as presented on page 21, the firearm must be considered to be loaded and capable of being fired. Never aim at persons when handling the weapon.
PAGE 2
CONTENTS • • • • • • • • • • • • • Take note General Description Main features Technical data Function of the weapon Components parts Exploded drawing Safety devices Sights Loading and Firing Unloading Dismantling Safety and guarantee instructions GENERAL DESCRIPTION The GLOCK Safe-Action self-loading pistol, with no-compromise design, combines virtually all the features demanded of the modern handgun of today - and tomorrow : • • • • Extreme low overall weight High Magazine capacity Maximum possible saf
PAGE 3
The weapon has passed the most stringent military and/or industry tests and is regarded as an absolutely top-class product. TECHNICAL DATA Model GLOCK GLOCK GLOCK 17 19 17L -------------------------------------------------Caliber 9x19mm 9x19mm 9x19mm Length (slide) 186mm 174mm 225mm Height inc. mag. 138mm 127mm 138mm 30mm 30mm 30mm Length between sights 165mm 152mm 205mm Barrel length 114mm 102mm 153mm 17 19 15 17 17 19 Mass weight -without magazine -empty mag. std.
PAGE 4
FUNCTION OF THE WAEPON 1) State of the weapon: loaded, i.e., a round in the barrel, firing pin (5) partially tensioned and secured, trigger (26), in the foremost position. the trigger safety integrated in the trigger is actuated with the trigger finger in order to pull the trigger all the way. 2) When the trigger slack is taken up to the first pressure point (travel 5mm) the weapon is released from safety, i.e. the trigger bar lies behind the safety ramp, the firing pin is under tension.
PAGE 5
20 21 22 23 24 25 25a 25b 26 27 28 29 30 31 32 32a 33 34 Slide lock spring Slide lock Locking block Trigger mechanism housing with ejector Connector Trigger spring New York trigger spring New York trigger spring plus Trigger with trigger bar Slide stop lever Trigger bar Trigger housing pin Follower Magazine spring Magazine floor plate Magazine insert Magazine tube Locking pin for non 9mm GLOCK pistols (Table No. 1) Above components part numbers are referring to the exploded drawing.
PAGE 6
PAGE 7
SAFETY DEVICES The weapon has no externally located safety devices which need to be actuated separately. All the safety or safety release devices function automatically. 1. TRIGGER SAFETY This is incorporated into the trigger (26) in the form of a lever, and in the untouched state blocks the trigger from being moved backwards. If the weapon is allowed to drop, or if the trigger is subject to an off centre, lateral pressure, it is still impossible for a shot to be fired.
PAGE 8
3. 4. Pull back the slide with free hand, and allow it to spring forwards into the final position. The trigger finger of the shooting hand remains outside the trigger guard. The weapon is now secured and ready to fire. After the last round has been fired, the slide remains open. Remove the empty magazine from the weapon by pushing the magazine catch (19).
PAGE 9
4. Removal of the slide (see photo) is carried out as follows: – Grasp the pistol in the right or left hand in such a way that four fingers rest over the slide and the thumb rests on the rear side of the receiver. – Using the fingers draw back the slide (1) about 3mm – Pull the slide lock (21) – Push the slide forwards and separate it from the receiver. If the slide is drawn back too far (more than 3mm), the trigger will move to the foremost forward position.
PAGE 10
4. – With the slide removed, it is not permitted to tension and spring the firing pin (5) forward, since this could damage the firing pin safety. – The steel insert located in the cover platte (15) to the slide must not be removed. No liability whatever can be accepted if inexpertly manufactured or inexpertly filled ammunition is used. All liability whatever is excluded in the event of these instructions not being observed.