Datasheet

GlobTek, Inc.
www.globtek.com
186 Veterans Drive,
Northvale, NJ 07647
Tel. [phone]
Fax [phone]
Drawing Title:GT-41080-1817.9-5.9, ITE Power Supply, Efficiency Level: V, Case Color/Style: GlobTek Black,
Wall Plug-in, Regulated Switchmode AC-DC, Input Rating: 100-240V~, 50-60 Hz, Interchangeable Blades
http://en.globtek.com/interchangeable-blades.php, Output Rating: 18W, 12V@1.5A, Output Configuration: 1830
mm, 20/1C + Shield Cond, UL 1185, Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch
or Equal, Ferrite: None, GlobTek Black, GT Cord # C0284, Pin Out: Center Positive (+V), Blades/Input Cord:
Q-Series Europe, Approvals: C-Tick, CB, CCC, China RoHS, cULus, Double Insulation, EC, GOST-R, IP52,
IRAM, Korea, Korea (12V Only), Level V, LPS, NEMKO, NrCan, PSE, RoHS 2, Ukraine, VCCI, WEEE
Model No.GT-41080-1817.9-5.9
Part No.WR9QE1500LCPNEU(RVB) RevA
PROPRIETARY INFORMATION
PROPRIETARY OF GLOBTEK, INC. ANY REPRODUCTION, DISCLOSURE OR USE OF THIS DRAWING, IN WHOLE OR IN PART, IS HEREBY PROHIBITED EXCEPT AS SPECIFIED IN
WRITING BY GLOBTEK, INC.
rmünt /07/15/2014 11:20:13 AM
Page 6 of 11
OUTPUT CORD AND CONNECTOR: LC/C0284
ACTUAL CONNECTORS, OVERMOLDS, FERRITES MAY VARY SLIGHTLY FROM THE PICTURE BELOW
CABLE TYPE UL 1185
CABLE LENGTH(mm) 1830
CABLE TOLERANCE(mm) +150-0
WIRE GAUGE (AWG) 20
CONDUCTORS 1C + Shield
HANK DIMENSION (mm) 70 +/-10mm
CABLE / CONNECTOR OVERMOLD COLOR GlobTek Black
FERRITE TYPE / DIMENSION None
FERRITE # OF TURNS N/A
FERRITE DIMENSION FROM STRAIN RELIEF N/A
FERRITE DIMENSION FROM PLUG N/A
PLUG TYPE
Female Barrel 5.5 * 2.5 * 11mm No internal
Spring Clip nor Locking Notch or Equal
OVER MOLD ORIENTATION Straight
CONNECTOR PIN OUT: Center Positive (+V)
ADDITIONAL REQUIREMENTS
ADDITIONAL OUTPUT PLUG OPTIONS ARE AVAILABLE AT http://www.globtek.com/connectors.php
STANDARD PLUGS AND CONNECTORS CAN BE SEEN ONLINE AT http://www.globtek.com/connectors.php