Datasheet

GlobTek, Inc.
www.globtek.com
186 Veterans Drive,
Northvale, NJ 07647
Tel. [phone]
Fax [phone]
Drawing Title:GT-41080-1817.9-5.9, ITE Power Supply, Efficiency Level: V, Case Color/Style: GlobTek Black,
Wall Plug-in, Regulated Switchmode AC-DC, Input Rating: 100-240V~, 50-60 Hz, Interchangeable Blades
http://en.globtek.com/interchangeable-blades.php, Output Rating: 18W, 12V@1.5A, Output Configuration: 1830
mm, 20/1C + Shield Cond, UL 1185, Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch
or Equal, Ferrite: None, GlobTek Black, GT Cord # C0284, Pin Out: Center Positive (+V), Blades/Input Cord:
Q-Series Europe, Approvals: C-Tick, CB, CCC, China RoHS, cULus, Double Insulation, EC, GOST-R, IP52,
IRAM, Korea, Korea (12V Only), Level V, LPS, NEMKO, NrCan, PSE, RoHS 2, Ukraine, VCCI, WEEE
Model No.GT-41080-1817.9-5.9
Part No.WR9QE1500LCPNEU(RVB) RevA
PROPRIETARY INFORMATION
PROPRIETARY OF GLOBTEK, INC. ANY REPRODUCTION, DISCLOSURE OR USE OF THIS DRAWING, IN WHOLE OR IN PART, IS HEREBY PROHIBITED EXCEPT AS SPECIFIED IN
WRITING BY GLOBTEK, INC.
rmünt /07/15/2014 11:20:13 AM
Page 11 of 11
FUSING: Internal fuse for Line is provided in the power supply. A blown internal fuse is an indication of catastrophic failure
of circuit component(s). Repair must be performed by GlobTek, Inc. authorized personnel. Fuses must be replaced with
same type and ratings per GlobTek internal documentation.
FUSIBLES: La fuente de alimentación provee un fusible interno para la línea. Un fusible interno quemado es
un indicador de una falla catastrófica de los componentes del circuito. La reparación debe ser hecha por personal
autorizado de GlobTek, Inc. Los fusibles se deben reemplazar por los mismos tipos y rangos que la documentación
interna de GlobTek mencione.
This symbol on an instrument indicates that the user should refer to the operating instructions located in the manual.