User's Manual

- 2 -
Installation method
1. Battery Installation: open the battery cover (Fig. 1).
Please assure to install the batteries correctly in
place and replace the cover of battery.
2. Plug the receiver into an available USB port on the
computer which automatically detects and installs it.
3. Press the Setup button on the receiver to turn off the
LED light. (Fig.2)
4. Hold the mouse close to the receiver. Press the
Connect button of the mouse (Fig. 1).
The receiver’s LED light blinks indicating that the
set-up has been completed.
Note: For initial use, please recharge at least 4 hours.
If it any lag, kindly check battery power.
Setup Button
LED light
Fig. 2
Fig. 1
Connect button
Battery Cover